51975 Toro Trimmer - Overview

The OEM Air Filter is used to stop debris and particles from entering the carburetor and engine, which could cause damage. It is attached in the air filter housing. It comes in black, and is contructed from foam. Installation is rated as "Easy" by customers, and will require a screwdriver. (Tip: You can place the filter in a plastic bag w...Read moreith a bit of oil, remove it, and then squeeze the filter to drain the excess oil. The remaining oil will work as a sticky trap). If the part becomes worn over time, the engine will be hard to start and will run rich. In this case, replace the part. Refer to your make, model and diagram to ensure this is the correct part for you.

This cutting head assembly is for line trimmers. Cutting head assembly attaches to the drive shaft and houses the cutting line. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included.

This is a rubber primer bulb with a plastic adapter attachment that is used on a variety of lawn and garden equipment models. This bulb attaches to the carburetor and is used to pump gasoline from the fuel tank into the gas chamber of the carburetor. Over time and through regular use, the primer bulb will lose its elasticity and may crack...Read more, requiring it to be replaced. To replace your primer bulb, you simply need to locate the bulb on your machine, unscrew the housing and remove the bulb, and secure the new one. This bulb is sold as an individual part and has a 2.25cm (7/8-inch) outer-diameter and a 3.33cm (1.3125-inch) height.

This trimmer head assembly holds and feeds cutting line while rotating to trim grass and weeds. Designed for smooth line advancement, it supports even cutting results and dependable performance.

This flanged star washer is a manufacturer-sourced replacement part designed for use trimmers. It is also known as a tooth lock washer due to its serrated inner edge which resembles inward facing teeth. These teeth bite into the head of the fastener and provide a better grip than standard washers. This washer also has a flange on one side...Read more which is a lip that extends past the edge of the washer. It helps to distribute the load of the fastener over a wider area to provide extra stability and a more secure hold. Over time the washer may wear down or become damaged. To remove the washer, first unthread the bolt/screw it is fastened on. Use pliers to grip the washer and gently twist it off. Place the new washer over the fastener with the teeth facing toward the surface being fastened and insert it into the designated hole. Ensure that it is locked into place. Each washer is sold individually.

This is a genuine OEM replacement part, it is made out of Metal with Fabric Filter Material. It is sold individually and is used on a variety of Lawn and Garden Equipment. This is an in-tank fuel filter which makes sure that the fuel delivered to the engine is free of any debris or contaminants. It will over time become clogged and restrict the fuel getting to the engine so it will need to be replaced.

This is an authentic replacement part manufactured for use with trimmers. The special spring is used to provide compression for the spool to recede into the housing when bumping more string out of the trimmer head. This spring is sold as an individual replacement part, and will come with the complete trimmer head assembly. Please see model diagram for associative parts.

This filter element is a genuine Toro replacement part that is sourced from original equipment manufacturer for use on handheld lawn and garden equipment. The purpose of this filter is to keep dust and other contaminates from going into the carburetor. Keep in mind, one high quality foam element is included per order.

This is an authentic OEM sourced component which is designed for use with Toro handheld string trimmers. It is a high-quality replacement for a missing or a faulty bump knob that helps to retrieve the line. Please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct application of this part. K...Read moreeep in mind this high-quality bump knob is made of durable plastic and is sold individually. Replacing it is a simple task that does not require any tools, simply remove the old and secure the new.

It is a genuine OEM approved component that is specially made for use with handheld lawn and garden equipment. The purpose of this clip is to secure the fuel line, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Unfortunately, over time parts may wear out, get ...Read moredamaged or simply lost eventually requiring a replacement. Please note this high-quality clip is made of durable metal and is sold individually.

This is an authentic OEM sourced component which is specially designed for Ryobi, Homelite and Toro lawn and garden equipment. It is an identical replacement for a missing or a faulty clip that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application ...Read moreof this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.