51948 Toro Trimmer - Overview

The OEM Air Filter is used to stop debris and particles from entering the carburetor and engine, which could cause damage. It is attached in the air filter housing. It comes in black, and is contructed from foam. Installation is rated as "Easy" by customers, and will require a screwdriver. (Tip: You can place the filter in a plastic bag w...Read moreith a bit of oil, remove it, and then squeeze the filter to drain the excess oil. The remaining oil will work as a sticky trap). If the part becomes worn over time, the engine will be hard to start and will run rich. In this case, replace the part. Refer to your make, model and diagram to ensure this is the correct part for you.

This replacement fuel cap is supplied directly from the original equipment manufacturer for use with Toro handheld lawn and garden equipment. It is specially designed to keep the fuel in the tank, this part provides an identical replacement for a missing or damaged component which came with the new unit. Please note this high-quality plastic item is sold individually.

This is a rubber primer bulb with a plastic adapter attachment that is used on a variety of lawn and garden equipment models. This bulb attaches to the carburetor and is used to pump gasoline from the fuel tank into the gas chamber of the carburetor. Over time and through regular use, the primer bulb will lose its elasticity and may crack...Read more, requiring it to be replaced. To replace your primer bulb, you simply need to locate the bulb on your machine, unscrew the housing and remove the bulb, and secure the new one. This bulb is sold as an individual part and has a 2.25cm (7/8-inch) outer-diameter and a 3.33cm (1.3125-inch) height.

This filter element is a genuine Toro replacement part that is sourced from original equipment manufacturer for use on handheld lawn and garden equipment. The purpose of this filter is to keep dust and other contaminates from going into the carburetor. Keep in mind, one high quality foam element is included per order.

Front handle asm

This item has been OEM sourced to ensure a high level of quality. The primer assembly is intended to be used with trimmers and leaf blowers from Toro. The primer assembly is part of the fuel system. This item attaches to the fuel lines and is used to move fuel to and from the carburetor and tank. This item is sold as an individual replacement part.

This replacement starter housing assembly is an authentic OEM sourced item that is specially designed for Toro handheld lawn and garden equipment. It is the assembly that allows user to easily start the unit by pulling on the starter rope. It includes the plastic housing, starter pulley, recoil spring, plastic grip and the pull rope. Please note the hardware to secure this starter assembly is sold separately.

This is an OEM replacement part for Toro gas trimmers. The fuel filter remove debris before it reaches the carburetor in your gas-powered equipment. This part made of plastic and is sold individually. For installation you will need socket wrench to remove any shrouds or panels, and a pair of needle nose pliers.

This is an authentic Toro replacement part that is sourced from the original manufacturer for use with trimmers and blowers. The metal hose clip is used to secure the fuel line to the carburetor connector. This item may require a screwdriver and small nose pliers to install. This item is available as an individual replacement part.

This front engine housing protects the front section of the engine while providing structural support and proper alignment for internal components. It helps shield the engine from debris and impact during operation. Replacing a cracked or damaged housing restores proper engine support and reliable equipment operation.