514 (9050100) Simplicity Chipper Shredder - Overview

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

Hammer-j .179thk 1.25

This roll pin is designed to secure the grip height adjustment lever to the lift lever of your lawn mower or tractor. Over time, it can become damaged, or may need to be replaced if you are also replacing the handle. This part is dark gray in color, sold individually, and is made of metal. It is a repair that customers rated as easy; it...Read more requires a hammer and punch, and the new roll pin can be attached to the height adjustment lever handle.

Lockwasher split 3/8

Washer flat

This authentic manufacturer-sourced component is specially designed for Murray, Snapper and Simplicity lawn mowers. It is an identical replacement for a missing or a damaged hex nut that was installed on a new unit. Check the diagrams for your specific model for the exact location and the correct application of this hardware. Keep in mind...Read more this high-quality product is made of durable metal and is sold as an individual item. A wrench will be needed to secure or remove it.

This is an original Snapper replacement part. The screw is designed by the manufacturer for use in riding mowers, snow throwers, and tillers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts diag...Read moreram to be sure of ordering the correct part. You will require a wrench when replacing this item. This part is sold individually.

This hopper guard in your chipper shredder prevents debris from forcefully escaping the hopper during operation. It is often found on the opening of the hopper, covering the feeding chute. To check if it is broken, inspect it for chips, fragments, or gaps that allow debris to escape. If damaged, it is crucial to replace it to avoid injury...Read more from flying debris. To remove the existing guard, use a wrench or socket to unthread the screws on the retaining strip, then lift the guard from the machine. This replacement part is sourced directly from the original equipment manufacturer.