511907 Troy-Bilt Tiller - Overview

This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws...Read more used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

This OEM Wheel Shaft Oil Seal is a black rubber part which attaches to the drive shaft to prevent leaks between the wheel shaft and transmission case. Installation is rated as "Medium" difficulty and requires a Screwdriver, Hammer, Washer, and Pipe to fit in the seal. If broken due to damage/fatigue, there will be a leak and the part shou...Read moreld be replaced. Refer to your make, model, and diagrams to ensure this is the right part for you.

This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual

This forward drive V-belt is used on rear-tine garden tillers to transfer power from the engine to the transmission for forward movement. Built for durability and consistent grip, it helps maintain smooth operation of the drive system. It’s a direct replacement for worn or slipping belts to restore proper tiller performance and traction.

This Oil Seal has an OD of 1-3/4" and ID of 3/4". Installation of this OEM seal requires a screwdriver, pliers, socket set and wrench set, and is rated as being "Medium" difficulty by customers. This rubber seal attaches onto the drive shaft and prevents leaks between the drive shaft and transmission case. If broken due to wear/fatigue th...Read moreere will be a leak, and the part should be replaced. Refer to your make, model and diagram to ensure this part is correct for you.

NOTE: Battery is not charged and does not include electrolyte or acid.

This hex bolt is a genuine OEM fastener used in various lawn and garden equipment and machinery. It has a hexagonal shaped head, with a diameter of 3/8 inches. The bolt shaft is 1.5 inches long with 24 threads per inch. The hexagon shape makes the bolt easier to grip and tighten using a wrench or a set of pliers. Over time, it is normal f...Read moreor the bolt to crack, corrode, or for the shaft threads to wear down. Inspect all the bolts on your equipment and replace all those that show visible signs of wear. Use a socket wrench to remove the faulty bolt(s) and thread the new one into position. Each bolt is sold individually. Secure it with a wrench or pliers and be careful not to over tighten as this could damage the bolt and equipment.

Built for a right-hand position, this 12-inch bolo tine curves to cut and lift soil as the tiller moves. The black coating helps protect the metal during storage and normal use. This is one outer tine, not a complete set. Check the machine diagram for its exact place because ?right-hand? can refer to the tine layout, not simply the side y...Read moreou see. Stop the engine, close the fuel valve, and disconnect the spark plug. Wear sturdy gloves, mount the tine with its curve facing the shown direction, and secure it with sound hardware.

This 12-inch left-hand bolo tine cuts and turns soil as the tiller shaft rotates. Replace it if the blade is bent, cracked, badly worn, or no longer tills at the same depth as the other tines. Left- and right-hand tines curve in different directions, so use the complete model diagram to identify the correct position. Stop the engine, let ...Read moreit cool, close the fuel valve, and disconnect the spark plug lead. Support the tiller securely, wear heavy gloves, and inspect the mounting bolts and tine holder before fitting the replacement.

This is a genuine OEM sourced part which is specially designed for use with lawn and garden equipment. It is an identical replacement for a missing or a faulty bolt that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind t...Read morehis high-quality hex bolt is made of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.

This is a genuine OEM sourced hardware that is specially made for MTD and Troy-Bilt tillers. It is utilized to provide a tight seal on the eccentric shaft, unfortunately, over time it will wear out and it may begin to crack eventually requiring a replacement to ensure peak performance. Keep in mind this high-quality seal is made of durabl...Read moree rubber material and is sold individually. Please make sure to check the diagrams of your model for the exact location of this component.