5000P - Overview

This Chain Bar Adjuster kit is a kit which contains all necessary hardware for adjusting a chain bar on a chain saw. Installation is rated as "Easy" and requires a screwdriver, wrench set and socket set. This part comes directly from the manufacturer.

The OEM Mounting Bar Nut is a nut used to install a mounting bar to your machine. Installation requires a wrench set and socket set, and is rated as "Easy". This nut attaches to the chainbar studs.

This Bar Pin Adjuster is an OEM part used to adjust the tension on the bar, which loosens or tightens the chain. It attaches to the slot in the bar, and the chainsaw bar adjusting screw. Installation is rated as "Easy" and requires a screwdriver. Refer to your make, model and diagram to ensure this part is correct.

This OEM bar adjustment retainer is a metal component that securely holds the adjustment screw and pin in place, allowing you to adjust the chain tension. It is typically located near the front of the chainsaw, close to the guide bar. If the guide bar is over-pressured, the retainer can become stressed and fail, causing it to ride up on t...Read morehe screw. Signs of a damaged retainer include visible breaks or deformations. You may also have trouble in tightening or loosening the chain, as the screw may become loose during adjustment. To remove a faulty retainer, remove the side cover by loosening the nuts and the tension screw on it with a socket. Unscrew the guide bar and replace the damaged retainer. When installing the new retainer, ensure the cone points towards the adjustment pin. Please note that the replacement retainer is sold separately from the guide bar and adjustment pin.

This is a Manufacturer Approved replacement part designed for use with Gas Pole Pruners. Bar holds the cutting chain in place. If it is bent or worn out, causing the chain to not cut properly the bar should be replaced. It is made out of Metal and it is Sold Individually. You would need a Hex Keyand a Wrench to replace this part. • Re...Read moremove the housing • Release the chain tension • Remove the chain and the tensioner • Remove the bar and replace it with a new one • Secure the tensioner and the chain • Reassemble the housing and tighten the chain

This replacement screw is a high quality hardware that is designed for use with Paramount, Poulan and Weed Eater power equipment. It has multiple applications depending on your equipment, please make sure to check appropriate diagrams for correct location and use of this item. One durable hex socket head screw is included per order.

This is a genuine replacement part for Craftsman chainsaws. The bar bolt is designed to sit behind the bar mounting plate and gives a location for the bar to fasten to. The bolt is made from high-quality metal. Note you require two bolts to fasten the bar. This item is sold individually.

This Genuine Manufacturer Sourced replacement part is designed for use with Poulan Chainsaws and Pole Pruners. It is made out of Metal and it is Sold Individually. This is the part that fits over the Bar and it is what cuts the material. Over time the Chain will stretch and become dull so it will need to be replaced. To replace this cha...Read morein you would need a Wrench/Socket Wrench and a Screwdriver. • Remove the Guide Bar Side Panel • Release the Chain tension • Remove the old Chain • Loosen the tensioning screw • Thread the new chain onto the saw • Align the guide bar • Replace the side plate • Tighten the chain to the correct tension • Finish tightening the side plate nuts

This is an authentic replacement part manufactured for use with Poulan pole pruners. The oil kit assembly is used to provide the lubrication to the sprocket and chain. This oil kit is available as an individual replacement part, please see model diagram for associative parts.

This sprocket assembly kit is produced by original manufacturer. It is compatible with various Poulan power tools. Each kit includes one (1) each of: sprocket, washer, and sprocket retainer. Each item is available separately as well. Sprocket item # 530056520 Washer item # 530056521 Sprocket retainer item # 530056563

This is a genuine OEM approved replacement part which is specially designed for use with Poulan handheld lawn and garden equipment. It is designed to keep the oil in the tank, over time it may wear out or get damaged eventually requiring a replacement to ensure a tight seal. Keep in mind this high-quality component is made of durable plastic and is sold individually.