483-SUC (Type 0) Craftsman Engine - Overview

This key a genuine manufacturer-sourced replacement part for use with outdoor equipment. They key is inserted into the ignition to power on the equipment. It is made of durable plastic and is approximately 1 inch wide and 2.25 inches long. You will need a replacement key if yours is broken or lost. Each key is sold individually.

This fuel bowl gasket is an authentic OEM replacement part. It is a thin, rubber strip responsible for creating a tight seal between the fuel bowl and carburetor to prevent fuel from leaking out. If the fuel bowl gasket is faulty, it can cause fuel to leak from the carburetor, resulting in rough idling, stalling, or difficulty starting th...Read moree engine. Over time the gasket may lose its elasticity, tear, or fall off due to exposure to high heat, and fuel, or because of improper installation. To remove the faulty gasket, you will first need to detach the fuel bowl from the carburetor body. Peel off the old gasket and thoroughly clean the surface to remove any residue or dirt. Align the new gasket with the fuel bowl and carburetor and press it in until it is flat and secured to the sealing surface.

The fuel tank nipple, also referred to as a fitting, connects the fuel tank of your lawn equipment to its engine fuel line, allowing fuel to reach the engine. If you observe fuel leaks or a loose connection, the nipple may be damaged and requires replacement. When removing the old fuel tank nipple, ensure the tank is empty and the engine ...Read moreis turned off. Use a wrench or pliers to detach the nipple. This high-quality OEM replacement part is sold individually.

This mounting bolt seals the fuel system and keeps the fuel bolt securely attached to the carburetor in a variety of gas-powered outdoor equipment. It is a genuine OEM part made of metal with dimensions of 0.25-20 x 0.875 inches. If you notice that the bolt is corroded or rusted, it will need to be replaced. A faulty or loose mounting bol...Read moret may cause fuel to leak, make it difficult to start or run your equipment engine, and may allow contaminants to enter the engine. The bolt is easy to install using a wrench or socket. Be careful not to overtighten the bolt as this may damage the fuel bowl. Each item is sold individually.

Ensure reliable cold-weather starts with this genuine OEM primer bulb, designed specifically for use with Yard Machines and MTD snowblowers. Unlike aftermarket alternatives, this high-quality part is sourced directly from the original manufacturer, guaranteeing a perfect fit and dependable performance. The primer bulb plays a crucial r...Read moreole by forcing fuel into the carburetor, making it easier to start your engine—especially in colder conditions. Over time, the rubber material can lose elasticity or develop cracks, which can affect performance and require replacement. This durable rubber primer bulb is built to withstand regular use and is sold individually. Replacing a worn primer bulb is a simple and effective way to keep your snowblower running smoothly all season long.

It is a genuine item that is supplied directly by the original equipment manufacturer for use with lawn and garden equipment. The cam actuates rocker arms that press down on the valves, opening them. This is a high-quality replacement for a missing or a damaged arm-rocker that was originally installed on a new unit. Please make sure to ch...Read moreeck the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality rocker arm is made of durable metal and is sold individually. A wrench set will be needed to take the engine apart when performing this repair.

This genuine part is a M6-1 x 12 Grade 8.8 mounting bolt that is zinc-plated. It is used to secure parts of your machine together, keeping these components tightly attached to each other so that they do not budge during operation. In lawn equipment, this bolt is usually used to attach the engine to the housing of the machine, but you may ...Read morealso find it in other areas of the machine. If the bolt rattles when you shake it, even when tightened, it is time to replace it. It must also be changed if it is corroded or bent, or else it may damage the components it is holding together. You will need to remove this mounting bolt with a socket wrench. This part is sold separately, so it is important to consult your user manual to understand how many bolts your machine needs. If you were initially replacing one bolt on your machine, you should consider purchasing more, as these bolts wear out at the same rate and you may end up needing to replace multiple bolts at once.

An oil drain plug is used to provide a convenient, controlled and easier way to drain the oil from the engine and is typically located at the bottom of the machine, screwed into the oil sump/pan. This oil drain plug is compatible with various makes and models of lawn equipment and is made of high-quality metal measuring approximately 1-in...Read morech in length and is sold as an individual part. If you notice oil leaking from your machine, or worse performance from your machine, this drain plug could be missing or damaged. To replace this drain plug, simply unscrew the old drain plug and screw this one in its spot, making sure to tighten it to the manufacturer standard.