4818 Husqvarna Lawn Mower - Overview

This item is sourced from the original manufacturer. It is an authentic part used with riding lawn tractors/mowers. This is the switch that allows user to engage blades. To stop mower blades, place attachment clutch control in the "DISENGAGED" position. One (1) plastic switch is included per order. Mechanical switches tend to break with t...Read moreime, eventually requiring replacement. This is standard 8 terminal black switch. Replacing this switch is a simple task. • Make sure to disconnect spark plug • Once you gained access under the housing disconnect wires • Remove old switch by pushing on side tabs • Secure new PTO switch • Reconnect wires and spark plug • Test the unit

It is a genuine manufacturer-approved part which is specially designed for use with Poulan, Weed Eater and Husqvarna riding lawn mowers and garden tractors. The purpose of the interlock switch is to act as a safety feature which will shut the engine off if the driver leaves the seat. Unfortunately, over time parts will wear out and it may...Read more begin to fail eventually requiring a replacement. Refer to the owners manual and the appropriate diagrams of your model for the correct location and installation of this component. Note, this high-quality plastic body switch is sold individually. You may need a screwdriver and pliers to perform this repair.

This is an original part from Husqvarna for use with Lawn Tractor/Riding Mowers. The starter solenoid engages and routes the battery electrical supply to the engine starter when the ignition switch turns to the start position. The most common reason for replacing the solenoid is when the engine will not start or even turn over, and the ba...Read morettery is not dead. This part is sold individually. The tools that you will need to replace the starter solenoid are two 7/16" wrenches, and a 3/8" socket. Disconnect the battery before installing this part.

This metal spacer is supplied directly from the original equipment manufacturer. The Husqvarna spacer is compatible with many lawn tractor machines. This part is fitted into the tire with a caster bushing and nut. The spacer fills the tire axle's gap, and helps the wheel to run more smooth. A wrench set, adjustable wrench, hammer and punc...Read moreh are helpful for the removal and the replacement. This item is sold individually.

This is a genuine replacement part manufactured for use with riding lawnmowers. This plastic roller is used to help the deck move across the ground and prevent the blades from shearing the ground. The rollers are sold individually.

This is a genuine Husqvarna replacement part manufactured for use with riding lawnmowers. Lawnmower blades wear from normal use and may need to be replaced to maintain the mowers performance. This blade is available as an individual replacement part.

This authentic item is supplied by the original equipment manufacturer for Husqvarna lawn and garden equipment. The bushing helps to provide spacing between connected parts while ensuring a tight seal. It is an identical replacement for a missing or a faulty bushing that was installed on a new unit, please make sure to refer to the approp...Read moreriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

It is an authentic item that is supplied directly from the original equipment manufacturer for use with Husqvarna and Poulan lawn and garden equipment. A washer is generally utilized to provide a tight seal between connected parts, over time it may wear out or simply get lost eventually requiring a replacement. Please make sure to check t...Read morehe appropriate diagrams of your specific model for the correct location and application of this hardware. Keep in mind this durable metal washer is sold individually.

This caged roller bearing is designed to support smooth rotation and reduce friction between moving parts in outdoor equipment. Measuring approximately 3-1/4 inches, it features a durable alloy steel construction for strength and long-lasting performance. The caged design keeps the rollers evenly spaced, promoting stable, quiet operation ...Read moreunder load. Ideal for replacing worn or damaged bearings, it helps restore reliable movement and extend the life of your equipment.

This is a genuine replacement part manufactured for use with riding lawnmowers. The clevis pin is used in various applications on different models of lawnmowers. This clevis pin is commonly used to connect a lever and an actuator that can be used to raise and lower the deck or engage the blades. The clevis pin is sold individually, please see model diagram for part location and usage.

It is a genuine item that is supplied by the original equipment manufacturer for use with Husqvarna and Bluebird lawn and garden equipment. This is an identical replacement for a faulty or a missing hardware that was installed on a new unit. To ensure the exact location and the correct application of this screw, refer to the appropriate d...Read moreiagrams for your model. Keep in mind this high-quality screw is made of durable metal and is sold as an individual item. A wrench will be needed to secure or remove it.