466242 Char-Broil Grill - Overview

This is a Genuine OEM replacement part designed for use with Char-Broil Grills. It is a Caster socket insert for rectangular Steel Tube Legs. This part is made out of Plastic and it is Sold Individually. To attach this Socket to a unit use a Bolt and a Nut (Not Included) to secure it to the Metal Leg of a Cart Side Panel. Then, simply bolt in the bottom of the Socket.

This burner brace is a replacement support component designed to stabilize and position a burner assembly securely. It helps maintain proper alignment and is commonly replaced when bent, warped, or damaged by heat or wear.

This stainless steel infrared emitter plate is designed for Char-Broil Tru-Infrared gas grills, providing even heat distribution and protecting food from direct flames for consistent cooking results. As part of the Tru-Infrared system, it converts heat from the burners into infrared energy, ensuring flavorful, evenly cooked meals. Ideal f...Read moreor replacing worn or damaged plates, this OEM component restores performance and durability. Each plate measures approximately 17 3/16" x 10", and multi-pack options typically cover a total area of about 17 3/16" x 30". Installation is simple—just position the plates within the cooking grate system for optimal heat control.

OEM Rolled Stainless Steel Emitter is sold individually. This is the emitter tray only designed to be paired with a cast iron cooking grate part 80021355. Dimensions are approx. 18-1/4 X 8-7/8" Part is 5/8" Thick. If the part is heavily rusted or damaged it needs to be replaced.

This is a genuine Char-Broil replacement part, it is sold individually. This is the part of the Grill that the flame is coming from on your Gas Grill. Depending on your grill you may have 3 or 4 of these. To connect these to your grill, place the flat side of the Burner in the rear side of the firebox in the slots provided. The front of t...Read morehe burner will connect to the Electrode W/ Wire/Collector. They will connect to the Hose Valve Regulator, and then the Control Knobs will be attached, so the flame can be controlled. This part includes one threaded pin and one cotter pins.

Oem Grate Cooking Infrared Cast Q 241mm X 432mm Matte Porcelain

This genuine manufacturer sourced replacement part is specially designed for Char-Broil grills. Igniter is the part that produces the spark to ignite the burner. Features 2 input terminals and two (2) output-connector on the back for the ignition switch. Requires a AA battery (not included). Replacing this electronic ignition module is ...Read moreeasy and does not require any tools • Unplug the wires from the old ignition module • Remove old igniter and replace it with a new one from the kit • Unscrew the button that holds module to the unit • Secure new module in place • Install a battery and secure the module with the button • Connect the wires and test the unit