This is a genuine Murray replacement part, it is sold individually. It is commonly used in lawn tractors, and is used in various places in the compatible models listed below. It is self tapping, with a 9/16 hex head. Made of metal.
This 5/16-18 wing knob is sold individually. It is a plastic part, black in color, that works on a variety of equipment. Its general function is to allow you to quickly loosen, remove, or fold down things such as handles. If it no longer loosens or tightens, it may be broken or damaged due to fatigue and wear.
Replacing this part is an easy repair that does not require any tools.
This OEM exhaust gasket in lawn and garden equipment creates a seal between the engine block and the muffler or exhaust pipe so that exhaust gases do not leak. This is 3.30cm in diameter and 6.35cm in length. Your machine may have a loud hissing or popping sound coming from the exhaust area if the gasket was faulty. You may also notice th...Read moree presence of black soot around the gasket or the exhaust. Your gasket needs to be replaced if it appears worn or deformed. Otherwise, your machine will experience exhaust leaks. To detach the gasket, remove the fasteners that secure it using a socket or wrench. You can detach the gasket from your machine afterwards. Please bear in mind that this replacement part is sold individually.
This cotter pin is an OEM part that is 1.25 inches long, gold in color, and sold individually. Made of metal, it can have a range of applications on a variety of lawn and garden equipment. Generally, you will need to replace this part if it becomes broken due to age and wear, or if you need to remove it for making other repairs.
This is...Read more an easy repair that only requires a pair of pliers to carry out. You need to bend one end around the shaft or bolt and bend the other around the back end of the bolt to complete the repair.
We understand how important a fully functioning dishwasher is for you, and we're here to help when there's a problem. We have the 2 Deter2nt Module that your dishwasher needs to work efficiently. This crucial component carries your dishwasher deter2nt and distributes it accurately throughout the wash cycles, keeping your dishes squeaky ...Read moreclean every time. Imagine no more specks, stains, or hazy films on your dishes - just sparkling clean results each and every time you unload. That's what you can expect with this little, but mighty, module. This module is crafted specifically for 2 dishwashers, ensuring a smooth and snug fit. Prior to installing this part, remember to either switch off the circuit breaker or unplug your dishwasher. Safety is crucial, so we also recommend wearing work gloves to protect your hands while doing the installation. 2tting your dishwasher back to performing its best doesnt have to be complicated or expensive with the right part. The 2 Deter2nt Module is your trusted choice to give your dishwasher a boost in performance and reliability. 2t back to enjoying perfectly clean dishes without a worry! Order your 2 Deter2nt Module now and 2t your dishwasher back to working like new!
The Blade Adapter is used to connect the mower blade to the base of the mower deck. The part is individually sold, silver metal, and measures approximately 2 inches in diameter. Installation requires a Wrench or Socket and is rated as "Easy". If damaged (likely due to fatigue and general wear) there maay be a vibration or rattling sound f...Read morerom it coming loose. Refer to your make, model and diagrams to ensure this is the correct part.
This is a genuine manufacturer approved replacement ground drive idler pulley designed for lawn tractors. The purpose of this pulley is to apply tension to the belt. It is made out of plastic with metal and it is sold individually.
The Mandrell Assembly, or Jackshaft Housing Assembly includes the housing, shaft assembly, bearing, and nut. It will require a screw driver, pliers, socket set and wrench set to install, and its installation is rated as "Easy". This silver, metal assembly is used to secure the mower's deck and is driven by a belt which turns the cutting b...Read morelade underneath. It attaches on the deck of the mower. If broken, damaged or worn it should be replaced. You'll know if this is the case if there is a stretching sound, grinding sound, or vibration. Refer to your make, model and diagrams to ensure this is the correct part.
This OEM engine screw is a genuine Briggs & Stratton replacement fastener designed for secure, vibration-resistant attachment of engine components in small gasoline engines and outdoor power equipment. Manufactured to exact factory specifications, it provides proper thread engagement and clamping force to help prevent loosening, reduce vi...Read morebration, and maintain long-term engine reliability under operating stress. Built with durable, corrosion-resistant materials for extended service life, it is an ideal replacement when original screws are missing, stripped, or worn, helping ensure safe assembly, consistent performance, and proper engine operation.
Genuine OEM replacement Blade, this item is sold individually. This Blade is used on the Lawn Tractor models shown below. Most of the Lawn Tractors listed below will use 3 of these blades. It would be a good idea to purchase 3 extra blades so when your blades on the Tractor need sharpening, you can use your extras.
This is a genuine Murray replacement part, it is sold individually. The 091334MA Bushing /Bearing is installed in the front wheel of the Murray Lawn Tractors shown below. There are two of the parts per wheel. One is installed on the outside of the wheel the other is installed on the inside of the wheel. Once they are installed the wheel, it can be positioned on to the left or right spindle assembly.
This replacement screw is a genuine OEM sourced hardware designed for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. It has multiple applications depending on the unit. Please always make sure to check appropriate diagrams for correct location and use of this hardware. This metal screw is sold individually.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Hit a root with the mower blade which broke the shaft housing.
8 of 16 peoplefound this instruction helpful.
David from HELENA, AL
A Bit Difficult
30 - 60 mins
Socket set, Wrench (Adjustable), Wrench set
Remove old blade and blade adapter (important part).Removed nut that holds pulley to the shaft housing, then removed the pulley and put belt out of the way.Used 3/8 air impact to remove bolts that held housing in. Pre-greased th inner housing before installing.New housing mount holes were not threaded so had to get new bolts to fasten. Us
... Read moreed 5/16 x 1-1/2" hex heads with lock washers, washers, and Teflon lock nuts. Once mounted, reinstalled the top pulley and belt, tightened top nut, and put on blade adapter at underside of housing. Now ready for new blade.