4655 - Overview

This is an individual plastic wheel compatible with various models of outdoor grills. This wheel attaches to an axle rod at the bottom of the grill assembly, allowing you to move it around. If you find your grill difficult to move and notice that the wheel(s) do not rotate or move smoothly due to damage or warping, you will need to replac...Read moree this wheel. Consider ordering multiple wheels if you find that more than one is not moving properly. This wheel measures approximately 6 inches in diameter and has a 1 1/16-inch outer diameter and 3/8-inch inner diameter bearing. To replace this wheel, you only need to remove the pin that secures it to the axle rod. Then, you can slide off the old wheel and install and secure the new wheel in place.

This is an authentic Char-Broil replacement part manufactured for use with outdoor gas grills. The wire has rounded push on connectors at each end and is used to carry an electric charge from the ignitor to the electrode to light the main burners. This wire is sold as an individual replacement part. • 11" in length.

This is an authentic Char-Broil replacement part manufactured for use with outdoor grills. The metal grease cup clip fits onto the underside of the cook box and is used to hold the grease cup which collects cooking drippings. The grease cup clip is sold individually.

This replacement push button ignitor is an authentic OEM sourced item that is designed for use with Char-Broil grills. Ignitor produces the spark to light up the gas that travels through the burner. One high quality plastic item is included per order, please note it is battery powered ignitor, battery is not included it is sold separately.

5 3/4" x 16"

11 1/4" x 19 1/4"