46399 Char-Broil Grill - Overview

This is an individual plastic wheel compatible with various models of outdoor grills. This wheel attaches to an axle rod at the bottom of the grill assembly, allowing you to move it around. If you find your grill difficult to move and notice that the wheel(s) do not rotate or move smoothly due to damage or warping, you will need to replac...Read moree this wheel. Consider ordering multiple wheels if you find that more than one is not moving properly. This wheel measures approximately 6 inches in diameter and has a 1 1/16-inch outer diameter and 3/8-inch inner diameter bearing. To replace this wheel, you only need to remove the pin that secures it to the axle rod. Then, you can slide off the old wheel and install and secure the new wheel in place.

This handle is an authentic replacement part sourced straight from the original equipment manufacturer. It is compatible with over 100 models of grills. This handle is made of plastic and it should be replaced if it is damaged. It is sold individually.

This is an authentic Char-Broil replacement part manufactured for use with outdoor gas grills. The wire has rounded push on connectors at each end and is used to carry an electric charge from the ignitor to the electrode to light the main burners. This wire is sold as an individual replacement part. • 11" in length.

The electrode is made of metal and helps to light the burner. This item is available as an individual replacement part. A screwdriver and a socket set might be needed during the installation process. It will need to be replaced if it breaks. This is an OEM replacement part for use in Char-Broil grills.

This is an authentic Char-Broil replacement part manufactured for use with outdoor grills. The metal grease cup clip fits onto the underside of the cook box and is used to hold the grease cup which collects cooking drippings. The grease cup clip is sold individually.

This replacement temperature gauge is specially designed for use with Char-Broil grills. It is an authentic OEM sourced item, not an aftermarket equivalent. This gauge is used to measure the temperature inside the grill. This part is made from durable metal and it is sold individually. Please note, the wing-nut and the washer to secure it are both included in this assembly. Dial reads 50 - 700 degrees.

This replacement push button ignitor is an authentic OEM sourced item that is designed for use with Char-Broil grills. Ignitor produces the spark to light up the gas that travels through the burner. One high quality plastic item is included per order, please note it is battery powered ignitor, battery is not included it is sold separately.

This is a genuine manufacturer-sourced component which is specially made for use with Char-Broil grills. It is an identical replacement for a missing or a faulty collector box twist lock that was installed on a new unit. This is the part that helps to lock the collector box. Please make sure to refer to the appropriate diagrams of your mo...Read moredel for the correct location and application of this part. Keep in mind this high-quality component is made of durable metal and is sold individually.