4638834 (1996-2003) Char-Broil Grill - Parts

This is an individual plastic wheel compatible with various models of outdoor grills. This wheel attaches to an axle rod at the bottom of the grill assembly, allowing you to move it around. If you find your grill difficult to move and notice that the wheel(s) do not rotate or move smoothly due to damage or warping, you will need to replac...Read moree this wheel. Consider ordering multiple wheels if you find that more than one is not moving properly. This wheel measures approximately 6 inches in diameter and has a 1 1/16-inch outer diameter and 3/8-inch inner diameter bearing. To replace this wheel, you only need to remove the pin that secures it to the axle rod. Then, you can slide off the old wheel and install and secure the new wheel in place.

This is an OEM replacement part sourced directly from Char-Broil for use with a gas grill. The purpose of a vaporiser bar is to distribute the heat evenly and prevent grease drippings from reaching the burner tubes which prevents flare-ups. Unfortunately, over time the vaporiser bar will rust and require replacement. This part is made of a high-quality metal and is sold separately.

This replacement push button ignitor is an authentic OEM sourced item that is designed for use with Char-Broil grills. Ignitor produces the spark to light up the gas that travels through the burner. One high quality plastic item is included per order, please note it is battery powered ignitor, battery is not included it is sold separately.

This cooking grate is a genuine Weber replacement part that is specially manufactured for use with gas grills. It used to support the food over the burners providing for the best grilling experience. It is advised to clean it after each use to prevent rusting which normally is caused by the heat and moisture from the left over food. This cooking grate made from durable metal and it is sold individually.

This is a genuine manufacturer-sourced replacement warming rack, it is specially designed for use with Char-Broil grills. It is generally utilized to keep the vegetables and the breads toasty while the main course is searing on the lower deck. This is a high-quality chrome plated warming rack which is sold individually.

This is an authentic Char-Broil replacement part manufactured for use with outdoor gas grills. The special briquet grate is used to support the ceramic briquets that provide a unique cooking experience and flavor. This briquet grate is available as an individual replacement part, please see model parts list for associative parts.

This is a genuine OEM supplied component which is specially made for use with Char-Broil grills. It is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this pal nut. This part provides an identical replacement for a mis...Read moresing or a faulty component that was included with a new unit. Keep in mind this high-quality nut is made of durable metal and is sold individually.