463270 Char-Broil Grill - Overview

This stainless steel cleaning tool is an OEM part sourced directly from Char-Broil. This tool was designed to scrape off cooked on food or grease from the grates of the grills listed below. Using this tool to maintain the cleanliness of the grill will extend the life of the grates. One item is included per order.

Genuine Char-Broil replacement part, this item is sold individually. It includes the igniter and two 26

This is a genuine Char-Broil replacement part, it is sold individually. This is the part of the Grill that the flame is coming from on your Gas Grill. Depending on your grill you may have 3 or 4 of these. To connect these to your grill, place the flat side of the Burner in the rear side of the firebox in the slots provided. The front of t...Read morehe burner will connect to the Electrode W/ Wire/Collector. They will connect to the Hose Valve Regulator, and then the Control Knobs will be attached, so the flame can be controlled. This part includes one threaded pin and one cotter pins.

Genuine Char-Broil replacement part, this item is sold individually. The Lower Grate Housing is placed underneath the 3486613 Cooking Grates. It helps distribute the heat evenly on the Grill. Over time it will collect food particles and grease from the Cooking Grates. It can be removed and cleaned with soap and water. Size: 18.4" L X 8.7" W

This genuine Char-Broil replacement flame tamer is designed to help your grill perform at its best. Sold individually, this part serves two important functions: it evenly diffuses heat from the burners below to ensure consistent cooking, and it acts as a barrier to prevent grease and food particles from clogging or damaging the burners. ...Read more Made from durable materials and built to match original specifications, this flame tamer helps extend the life of your grill while improving heat distribution and reducing flare-ups. Whether you're replacing a worn part or upgrading your grill’s performance, this OEM component is a smart and simple solution.

This genuine manufacturer sourced replacement part is specially designed for Char-Broil grills. Igniter is the part that produces the spark to ignite the burner. Features 2 input terminals and two (2) output-connector on the back for the ignition switch. Requires a AA battery (not included). Replacing this electronic ignition module is ...Read moreeasy and does not require any tools • Unplug the wires from the old ignition module • Remove old igniter and replace it with a new one from the kit • Unscrew the button that holds module to the unit • Secure new module in place • Install a battery and secure the module with the button • Connect the wires and test the unit

This is a Genuine Manufacturer Approved Control Knob used on Char-Broil Gas Grills. It helps to control your Burners. This part is made out of Plastic and it is Sold Individually. Replacing this part does not require any tools, this Knob fits over the Regulator Shaft. Please note Bezel is Sold Separately.

This is a genuine OEM replacement part for a Char-Broil Outdoor Stove. The grease tray is designed to catch grease drippings from food as it cooks. Before replacing this part make sure the stove is completely cooled down to avoid any possible injury. This part is made of metal with a grey powder coat finish. It is a separately sold replacement part.

This is a Genuine Manufacturer Approved replacement part designed for Weber Gas Grills. This cooking grate made out cast iron with black porcelain coating that helps to prevent food from sticking. Please note, grids should never be cleaned while hot. Doing so can often cause damage to the surface or coating of the grids. Cooking grate provides a stable cooking area for grilling. Includes one (1) grate per order.

This is an authentic OEM replacement part that is supplied directly from Char-Broil for use with a gas grill. The knob is used to control the temperature and intensity of the flame. This part does not require any tools simply connects to the burner valve. This part is made of chrome and plastic and is sold separately.

This is a genuine manufacturer-sourced replacement part which is specially designed for Char-Broil grills. It is one of the bumpers that were originally installed on a new unit. The part helps to provide support for the lid to prevent metal on metal contact. Refer to the appropriate diagrams of your model to ensure the correct repair proc...Read moreedure. One durable rubber bumper and a screw to secure it are included. A screwdriver will be needed to replace this component.

Fashioned exclusively for Char-Broil gas grills, this Electronic Ignition Module plays a vital role in your grilling operations. It acts as a dependable power supply to the igniters, enabling them to promptly light the burners. This guarantees an efficient and effortless start to your cooking process. Due to the nature of its function, it...Read more is recommended that it is installed with the usage of work gloves to ensure your safety. With this module, you can trust that your Char-Broil grill continues to perform to its high standards. This item is key to maintaining a consistent and powerful barbecue experience.