463246 Char-Broil - Overview

This stainless steel infrared emitter plate is designed as a replacement for Char-Broil Commercial and Signature Series infrared grills. It ensures even heat distribution across the cooking surface, reduces flare-ups, and enhances grilling performance for flavorful results.

Genuine Char-Broil replacement part, this item is sold individually. It includes the igniter and two 26

This burner brace is a replacement support component designed to stabilize and position a burner assembly securely. It helps maintain proper alignment and is commonly replaced when bent, warped, or damaged by heat or wear.

Oem Grate Cooking Infrared Cast Q 222mm X 432mm Matte Porcelain

This is a genuine Char-Broil replacement part, it is sold individually. This is the part of the Grill that the flame is coming from on your Gas Grill. Depending on your grill you may have 3 or 4 of these. To connect these to your grill, place the flat side of the Burner in the rear side of the firebox in the slots provided. The front of t...Read morehe burner will connect to the Electrode W/ Wire/Collector. They will connect to the Hose Valve Regulator, and then the Control Knobs will be attached, so the flame can be controlled. This part includes one threaded pin and one cotter pins.

Genuine Char-Broil replacement part, this item is sold individually. The Lower Grate Housing is placed underneath the 3486613 Cooking Grates. It helps distribute the heat evenly on the Grill. Over time it will collect food particles and grease from the Cooking Grates. It can be removed and cleaned with soap and water. Size: 18.4" L X 8.7" W

This genuine Char-Broil replacement flame tamer is designed to help your grill perform at its best. Sold individually, this part serves two important functions: it evenly diffuses heat from the burners below to ensure consistent cooking, and it acts as a barrier to prevent grease and food particles from clogging or damaging the burners. ...Read more Made from durable materials and built to match original specifications, this flame tamer helps extend the life of your grill while improving heat distribution and reducing flare-ups. Whether you're replacing a worn part or upgrading your grill’s performance, this OEM component is a smart and simple solution.

This genuine manufacturer sourced replacement part is specially designed for Char-Broil grills. Igniter is the part that produces the spark to ignite the burner. Features 2 input terminals and two (2) output-connector on the back for the ignition switch. Requires a AA battery (not included). Replacing this electronic ignition module is ...Read moreeasy and does not require any tools • Unplug the wires from the old ignition module • Remove old igniter and replace it with a new one from the kit • Unscrew the button that holds module to the unit • Secure new module in place • Install a battery and secure the module with the button • Connect the wires and test the unit

This heat tent helps distribute heat evenly while shielding burners from drippings and debris. Designed for durability and consistent heat management, it supports efficient cooking and is replaced when corrosion or damage affects performance.