42502X8C Murray Lawn Tractor - Overview

This 1/4-inch?20 UNC hex-head screw is 1 inch long. It secures a part on select small gasoline engines, but its exact location can change by model. Use the full engine model, type, and code numbers to guarantee the proper fit and placement. Turn off the engine, let it cool, and disconnect the spark plug before service. Check the mounting ...Read morehole and nearby parts for damage. Tighten the screw to the setting listed in the engine manual.

The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manufacturer. Most customers rated the replacement of the hair pin as an easy repair.

This replacement switch is a genuine OEM part, not an aftermarket equivalent. It is supplied directly from original equipment manufacturer for Murray riding lawn mowers and tractors. This switch is secured under the seat to prevent the engine from running without a driver in a seat. Mechanical switches over time tend to wear out requiring replacement. Please note, this plastic switch is sold individually.

This replacement spacer is a high quality item that is specially manufactured for use with Murray lawn tractors. This is an authentic hardware which has multiple uses depending on the model of the unit, please make sure to check appropriate diagrams for correct location and use of this part. It is made from durable metal and it is sold individually.

This metal driver pulley is used in Murray lawn tractors. It is a replacement part directly sourced from the manufacturer. This part is sold as an individual replacement. The drive pulley applies force to the motion drive belt, which is wrapped around this part. A wrench and pliers may be needed for the replacement of the pulley when it becomes worn or cracked.

This item is sourced from the original manufacturer. It is an authentic part used in Murray lawn tractors/mowers. A limit switch is an interlock safety switch which prevents the tractor from running in unsafe conditions. One (1) plastic switch is included per order. Mechanical switches tend to break with time, eventually requiring replacement.

This is an authentic OEM sourced replacement part which is specially designed for Murray lawn and garden equipment. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality bearing is made of durable plastic and is sold individually.

This part is commonly used in Murray lawn tractors and Briggs & Stratton engines. In lawn tractors it connects to the steering post. In engines it connects to the guard-rewind starter. Bearings of this type control and direct motion. They are therefore subject to metal fatigue and it is common to replace them regularly. A wrench is usually needed in this repair.

This is an original manufacturer-sourced component from Briggs and Stratton for use with a small engine. This part is used to hold the air cleaner cover in place and to keep it from coming loose. To replace this part you simply need to screw and unscrew it from the cover. The knob is made of plastic with a metal post this is an individually sold part.

This flange nut is designed for use in lawn and garden equipment. It is an OEM replacement part with a diameter of 0.375 inches and a thread pitch of 16 threads per inch. The nut has a ring-shaped extension on one end, known as a flange which helps to evenly distribute the clamping force of the nut and provide a more secure hold. Addition...Read moreally, the flange eliminates the need for separate washers and reduces the risk of abrasion on the surface being fastened. It is normal for the nut to corrode, crack, or for the threads to wear down over time. To replace the flange nut, unthread it from the fastener, and insert and secure the new one using a socket/wrench. Each sold individually.

This is a genuine Briggs & Stratton, Toro, and Murray replacement part for use in engines, generators, lawn mowers, lawn tractors, and snowblowers. The stud is made out of metal. A wrench may be needed during the replacement of this part. It will need to be replaced if it breaks. This item is sold individually.