Models
>
425015X92A
425015X92A Lawn Tractor - Overview
Models starting with 425015X92A
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Knob, 5/16-18 Wing (Black)
PartSelect #: PS9999469
Manufacturer #: 703065
This 5/16-18 wing knob is sold individually. It is a plastic part, black in color, that works on a variety of equipment. Its general function is to allow you to quickly loosen, remove, or fold down th...
$7.59
In Stock
Gasket--Exhaust
PartSelect #: PS9294808
Manufacturer #: 692236
This OEM exhaust gasket in lawn and garden equipment creates a seal between the engine block and the muffler or exhaust pipe so that exhaust gases do not leak. This is 3.30cm in diameter and 6.35cm in...
$5.71
In Stock
Cotter Pin
PartSelect #: PS9999599
Manufacturer #: 703312
This cotter pin is an OEM part that is 1.25 inches long, gold in color, and sold individually. Made of metal, it can have a range of applications on a variety of lawn and garden equipment. Generally, ...
$4.99
In Stock
Mandrell/Jackshaft Housing Assembly
PartSelect #: PS9254869
Manufacturer #: 1001200MA
The Mandrell Assembly, or Jackshaft Housing Assembly includes the housing, shaft assembly, bearing, and nut. It will require a screw driver, pliers, socket set and wrench set to install, and its insta...
$89.66
In Stock
Blade, 42 (3N1) (Sold Individually)
PartSelect #: PS9253894
Manufacturer #: 095100E701MA
No Longer Available
Nut
PartSelect #: PS8872769
Manufacturer #: 15X100MA
The Blade Nut is a 9/16-18" silver, metal nut. This part is sold individually, and requires a wrench and socket to install. Its installation is rated "Easy". This part secures the blade in place and a...
$3.99
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Hit a root with the mower blade which broke the shaft housing.
Remove old blade and blade adapter (important part).Removed nut that holds pulley to the shaft housing, then removed the pulley and put belt out of the way.Used 3/8 air impact to remove bolts that held housing in. Pre-greased th inner housing before installing.New housing mount holes were not threaded so had to get new bolts to fasten. Us
... Read more
ed 5/16 x 1-1/2" hex heads with lock washers, washers, and Teflon lock nuts. Once mounted, reinstalled the top pulley and belt, tightened top nut, and put on blade adapter at underside of housing. Now ready for new blade.
Read less
Parts Used:
-
David from HELENA, AL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set, Wrench (Adjustable), Wrench set
6 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!