41CDZ22C799 MTD Trimmer - Overview

This fuel tank assembly is supplied by the original manufacturer for use in trimmers. It is responsible for storing and transferring fuel to the engine for combustion. The assembly consists of a plastic tank, a fuel cap, a fuel filter, and the fuel lines which have a diameter of 0.25 inches. If the fuel tank is damaged, or the fuel lines ...Read moreare clogged, the assembly will need to be replaced. A faulty fuel tank assembly will result in fuel leakage, hard starting, rough idling, and poor equipment performance. To begin, drain the fuel from the tank. Disconnect the fuel lines and remove the mounting hardware that secures the assembly to the equipment. Pull off the old assembly and align the new one with the mounting holes. Secure the assembly in place and reconnect the fuel lines. Refill the fuel tank to complete the repair.

This is a genuine OEM replacement part designed for use with some Handheld String Trimmers. This filter is made out of Foam and it is sold individually. The purpose of this filter is to keep dirt and other small particles from entering the carburetor and engine and causing internal engine damage. Once this type of filter gets clogged or d...Read moreirty it should be changed (Not Cleaned). This is to prevent restricted air flow and foreign matter from entering the engine.

This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with trimmers and blowers. The gasket is used to seal the connection between the carburetor and the air cleaner assembly. It is recommended to replace gaskets when servicing the motor to ensure proper seals when the parts are reassembled. This item is available as an individual replacement part.

This clutch assembly is a genuine OEM replacement kit for outdoor lawn equipment. The kit includes the clutch drum, clutch, clutch washer, and screw. The clutch assembly transfers power from the engine to the cutting attachment which allows you to operate the equipment. Over time, the clutch assembly may malfunction due to normal wear and...Read more tear or accidental damage. If the small clutch assembly fails, the engine will likely stall, and the cutting attachment will not be able to engage. To remove the clutch assembly, first bind the piston to prevent it from rotating. You can do this by removing the spark plug and inserting a length of rope into the cylinder with a few inches remaining outside. Remove the clutch cover and use a clutch removal tool to remove the nut that secures the assembly. Pull the old assembly from the crankshaft and position the new assembly in its place, ensuring it is securely fitted.

This is a manufacturer approved O-Ring designed for lawn and garden equipment. This is the O-Ring that provides an Air Tight seal between Carburetor and Cylinder Head. If doing maintenance on carburetor it is recommended to replace the O-Ring instead of re-using the old one. Over time rings and seals tend to dry out and would no longer provide proper seal compromising engines performance.

Lower boom assembly

This air cleaner assembly is an OEM part direct from Craftsman and is specially designed to be used with a trimmer. The purpose of this part is to secure the air cleaner element which prevents dirt and debris from entering the carburetor. The cover is made of a durable plastic and is sold separately. Please note the air cleaner element is sold separately from the air cleaner cover.

This head assembly is an OEM direct from Craftsman for trimmers. This assembly houses the cutting line and connects to the drive shaft. This head assembly includes one head cap, two push nuts, one washer, and one housing head. You will need pliers to replace this head assembly. This assembly is made of plastic and metal components.

This is a genuine anti-rotation screw from the Ryobi manufacturer. The metal screw is compatible with many lawn and garden trimmers. This item works to help secure the clutch cover assembly. This part is sold individually. A screwdriver is needed in making the repair.

This authentic manufacturer-approved component which is specially designed for use with handheld lawn and garden equipment. The purpose of this o-ring is to provide an air-tight seal between connected parts, unfortunately, over time it may wear out and begin to crack eventually requiring a replacement. Please make sure to check appropriat...Read moree diagrams of your model for the correct location and application of this o-ring. Keep in mind this high-quality item is made of durable rubber and is sold individually.

This is an authentic Craftsman replacement part manufactured for use with trimmers. The head cap protects the line fitting and housing from wear due to contact with the ground. This special head cap is available as an individual replacement part.

This is a genuine OEM sourced part which is specially made for use with Craftsman handheld lawn and garden equipment. Its purpose is to deliver electric current from the ignition system to the combustion chamber. It will ignite the air fuel mixture by the spark. Unfortunately, over time a spark plug can wear out or it may get damaged even...Read moretually requiring a replacement to ensure peak performance. Keep in mind this high-quality spark plug is made of durable materials and is sold individually. Please make sure to refer to the owners manual of your model for the correct location and application of this component.