41BDC20C912 (2011) Cub Cadet Trimmer - Overview

This clutch assembly is a genuine OEM replacement kit for outdoor lawn equipment. The kit includes the clutch drum, clutch, clutch washer, and screw. The clutch assembly transfers power from the engine to the cutting attachment which allows you to operate the equipment. Over time, the clutch assembly may malfunction due to normal wear and...Read more tear or accidental damage. If the small clutch assembly fails, the engine will likely stall, and the cutting attachment will not be able to engage. To remove the clutch assembly, first bind the piston to prevent it from rotating. You can do this by removing the spark plug and inserting a length of rope into the cylinder with a few inches remaining outside. Remove the clutch cover and use a clutch removal tool to remove the nut that secures the assembly. Pull the old assembly from the crankshaft and position the new assembly in its place, ensuring it is securely fitted.

This plastic throttle trigger measures 2.5-inches in length and controls the power, speed, and intensity of the motor for your lawn equipment through the throttle cable and carburetor it is attached to. Sold as an individual part without any securing hardware, this trigger, although made of durable plastic, is a high-use part that will ne...Read moreed to be replaced more often than other parts. Check the user manual for your model for exact placement and installation location of this trigger.

This spool is for line trimmers. Spool houses the cutting line and fits inside the cutting head to cut grass and weeds. Wear work gloves to protect your hands when installing this part.

This is a genuine anti-rotation screw from the Ryobi manufacturer. The metal screw is compatible with many lawn and garden trimmers. This item works to help secure the clutch cover assembly. This part is sold individually. A screwdriver is needed in making the repair.

This retainer clip is a metal piece used to secure components and provide stability inside trimmers. It is an authentic manufacturer replacement clip which is positioned on the trimmer hub and designed to hold the spool in position during use. If the retaining clip is worn down or broken, the trimmer head and outer spool will come loose a...Read morend may slip off the shaft, the trimmer line will tangle and jam, and the trimmer may experience reduced power. You will need a small screwdriver and set of pliers to remove the faulty clip, and a retainer ring tool to lock the new one in position. This part is sold individually.

This is a genuine manufacturer approved replacement mulching door torsion spring designed for use with handheld trimmers/edgers. This spring helps the throttle trigger to retract. It is made out of metal and it is sold individually. Replacing this item you would need a screwdriver and pliers.

This is a genuine manufacturer sourced replacement fuel cap assembly. It is supplied directly from original manufacturer for use with a variety of gas powered lawn and garden equipment. It is used to keep the fuel in the tank. If the fuel cap is damaged or lost it should be replaced for the unit to function safely. This is a plastic fuel cap that is sold individually.

It is a manufacturer-sourced part that is specially designed for handheld lawn and garden equipment. The component protects and covers the air filter and the muffler on the engine. It is an identical replacement for a damaged or a missing air cleaner/muffler cover assembly that was installed on a new unit. Note this high-quality assembly ...Read moreincludes the plastic cover, the foam filter, the metal plate and the hardware to secure it. Refer to the owner\\\'s manual and the diagrams for your model to ensure the proper repair procedure. A screwdriver will be needed to replace this assembly.

This shield and blade assembly is an OEM part that is supplied by the manufacturer for use with several different models of trimmers. The purpose of the shield is to protect the user from any debris that can come loose while trimming. This shield assembly includes the cutting blade to trim the cutting string. Please note this does not inc...Read morelude the hardware to mount the shield. Made of a durable hard plastic this part is sold separately.

This is an authentic OEM MTD, Ryobi, Troy-Bilt, Yard-Man, Bolens, Yard Machines part for use with line trimmers. The engine flywheel attaches to the crankshaft behind the recoil starter assembly. The recoil starter engages the flywheel to spin and start the engine. The most common use for replacing the flywheel assembly is if the engine ...Read moreis misfiring, missing, stuttering not starting or overheating. This part is sold individually. Here is a list of tools that are needed to replace the engine flywheel a receptacle for draining fuel, Phillip's screwdriver, Torx wrenches, starter rope (or similar object) for binding the engine, spark plug wrench or socket, adjustable wrench, long-nosed pliers and a rubber mallet. Let the engine cool and disconnect the spark plug wire before installing this part.