41BD26SC900 MTD Trimmer - Overview

This OEM bump head knob assembly, known simply as the bump head assembly sometimes, advances the line on your trimmer in the spool. Black in color, it is made of plastic and steel and is sold individually. Tap your trimmer on the ground to see if the cutting line advances to determine if there is a problem with this part. If it will no ...Read morelonger feed, it is likely that this part needs to be replaced. Most of our customers rated this repair as easy. You can attach your new part to the cutting head with no special tools required to complete the repair.

This plastic throttle trigger measures 2.5-inches in length and controls the power, speed, and intensity of the motor for your lawn equipment through the throttle cable and carburetor it is attached to. Sold as an individual part without any securing hardware, this trigger, although made of durable plastic, is a high-use part that will ne...Read moreed to be replaced more often than other parts. Check the user manual for your model for exact placement and installation location of this trigger.

Genuine OEM replacement part, this item is sold individually. The 791-181459 Spring is installed in the 753-04257 slider. When not activated this part will keep the cutting line from coming out of the spool. When the Bump Head Knob Assembly is hit on the ground the springs and slider will be forced up into the spool housing releasing the ...Read morecorrect amount of cutting line. Most of the trimmers will use two of these springs.

This is a genuine anti-rotation screw from the Ryobi manufacturer. The metal screw is compatible with many lawn and garden trimmers. This item works to help secure the clutch cover assembly. This part is sold individually. A screwdriver is needed in making the repair.

An engine that starts but soon stops may have a blocked or damaged carburetor. Other signs include poor speed control, fuel leaks, and a primer that will not fill. The carburetor controls the mix of fuel and air needed for the engine to run. Similar problems can come from old fuel, a blocked filter, cracked hoses, or a dirty spark plug. C...Read moreheck these items first. Confirm fit with the complete machine model number because similar engines may use different parts. Allow the engine to cool and empty the fuel tank before service. Reconnect each hose and control cable in its original place, then test for leaks outdoors.

Genuine OEM replacement part, this item is sold individually. The 753-04257 Slider is part of the cutting string release system for the Trimmers listed below. If your trimmer is not releasing the cutting line properly check this part for wear and all of the other parts associated with it.

The housing is sourced from the original manufacturer for use with Craftsman gas powered trimmers. This part is a kit that is used to house the throttle trigger. The kit includes the housing, hardware, and the trigger. These housing kits are sold individually, please see part list for related parts such as the throttle cable.

This is a genuine replacement part from original manufacturer. It is compatible with Ryobi, MTD, Troy-Bilt, Yard Man, and Bolens machines. It's used with a variety of power tools including trimmers, tillers, and blowers. O-rings create a seal between solid parts, retaining pressure. Because many machines use more than one type of O-ring, ...Read moreuse care to ensure that the right one is being used in the right spot. This ring is sold individually.

This is a genuine manufacturer approved replacement throttle cable designed for use with handheld gas string trimmers. Throttle cable is connected to the carburetor and it stops the engine when you shift the lever to the full choke position. This assembly consists of a metal throttle cable and a plastic housing. Please note the trigger and screws for the housing are sold separately.

This is a genuine replacement part is designed for use with handheld trimmers. It is sourced from original manufacturer and it is sold individually. This split boom coupler includes metal coupler, knob and screws needed to fasten the upper shaft housing to the lower boom assembly. To complete this repair you would need a phillips head screwdriver.