41ASGBVG734 MTD Leaf Blower / Vacuum - Overview

This OEM fuel line and filter supply fuel from the tank of your engine to its carburetor. Made of clear plastic and sold individually, the fuel line may end up clogged or cracked, causing fuel to leak as a result of general wear and tear. The filter may also end up damaged or clogged over time, and shold be replaced regularly as a part ...Read moreof proper engine maintenance. Luckily, this is an easy repair that requires no tools to carry out.

The OEM fuel return line, or fuel return tube, is a clear plastic line that returns fuel from the primer bulb back into the fuel tank of your engine. You will know your fuel return line is in need of replacement if cracks or leaks have begun appearing, and fuel is leaking from your carburetor. This part is sold individually, and you wil...Read morel know if it is right for your engine by checking your model number or owners manual. One end of the line will attach to the primer bulb, and the other to the fuel tank; make sure all fuel lines are tight when completing this repair, to prevent leaks and fire hazard risks. Most customers rated this repair as easy.

The manufacturer-certified Air Cleaner Filter is a grey foam filter used to prevent debris and dirt from entering the carburetor and engine, causing damage. Installation is rated as "Easy". This filter may become clogged and cause the engine to run rough due the restricted air flow, at which time the filter should be replaced. This filter is placed inside the air cleaner housing.

This replacement vacuum bag collects and stores debris in your handheld blower. It is made from fabric and has an oval inlet and a fastening mechanism. A broken vacuum bag will leak or have visible tears, holes, or frayed edges. If it becomes clogged, you may notice reduced suction from your blower. It is strongly recommended to replace a...Read more broken vacuum bag assembly promptly, as debris can escape during blower operation. To remove the bag, locate its attachment point. You need to depress the two tabs at the oval end of the bag to release it from your machine. Please be aware that this authentic OEM vacuum bag is sold individually.

This is an original part from Craftsman for use with Trimmers and Cultivators. The carburetor mount gasket seals the space between the carburetor mount and the engine. The most common reasons for replacing the carburetor mount gasket is if there is oil leaking from the crankcase, the crankcase gasket is missing or damaged or any time the ...Read morecrankcase cover is removed. This part is sold individually. The tools that you will need to replace the carburetor mount gasket is a receptacle for draining fuel, Phillip's / Torx drivers, long-nosed pliers and a razor blade.

This is a genuine manufacturer sourced replacement fuel cap assembly. It is supplied directly from original manufacturer for use with a variety of gas powered lawn and garden equipment. It is used to keep the fuel in the tank. If the fuel cap is damaged or lost it should be replaced for the unit to function safely. This is a plastic fuel cap that is sold individually.

This genuine OEM sourced item is specially designed for use with gas powered lawn and garden equipment. This rope is part of the recoil starter mechanism which allows user to pull-start the engine. One durable nylon rope is included per order, please note the plastic grip handle is sold separately.

This is an authentic OEM part sourced directly from the original manufacturer. It is a black plastic part that snaps onto the motor housing. It holds the vacuum bag which is used to capture debris during vacuum mode. This part is sold individually.

This is an authentic OEM MTD, Ryobi, Troy-Bilt, Yard-Man, Bolens, Yard Machines part for use with line trimmers. The engine flywheel attaches to the crankshaft behind the recoil starter assembly. The recoil starter engages the flywheel to spin and start the engine. The most common use for replacing the flywheel assembly is if the engine ...Read moreis misfiring, missing, stuttering not starting or overheating. This part is sold individually. Here is a list of tools that are needed to replace the engine flywheel a receptacle for draining fuel, Phillip's screwdriver, Torx wrenches, starter rope (or similar object) for binding the engine, spark plug wrench or socket, adjustable wrench, long-nosed pliers and a rubber mallet. Let the engine cool and disconnect the spark plug wire before installing this part.

This durable plastic pull handle is a genuine part sourced directly from the manufacturer for use with the Ryobi equipment listed below. The handle connects to the rope of the starter housing assembly and is used to start the machine. This item is sold individually.

This is a genuine OEM sourced component which is specially designed for use with lawn and garden equipment. It is an identical replacement for a missing or faulty recoil spring that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this hard...Read moreware. Keep in mind this high-quality item is made of durable metal and is sold individually.