41AS4SCG755 MTD Leaf Blower / Vacuum - Overview

This is a foam air filter designed for use within various models of outdoor power equipment like trimmers and leaf blowers. This foam filter measures approximately 3-inches in length and fits within the air filter assembly to prevent contaminants from entering your equipment. Air filters commonly build up with dust and dirt over time, and...Read more will need to be replaced every so often, and regularly inspecting them for build ups can reduce the amount of extra maintenance that is required. If your air filter is clogged, it will lead to worse performance from your equipment, like difficulty starting or not starting at all, and can even damage the carburetor and engine. To replace the air filter, remove the cover for the air filter housing, and remove and dispose of the old filter. Rub a small amount of oil into the new filter before installing it and securing the air filter cover.

This is a genuine replacement part from original manufacturer. It is compatible with Ryobi, MTD, Troy-Bilt, Yard Man, and Bolens machines. It's used with a variety of power tools including trimmers, tillers, and blowers. O-rings create a seal between solid parts, retaining pressure. Because many machines use more than one type of O-ring, ...Read moreuse care to ensure that the right one is being used in the right spot. This ring is sold individually.

Authentic OEM sourced replacement carburetor made for use with handheld gas blowers. Carburetor helps to create a combustible mixture of air and gas to send it to the engine. Often if the engine doesn't start or starts and then quickly dies, the carburetor is likely the problem. This assembly includes a metal body carburetor, a rubber pri...Read moremer bulb and two rubber fuel lines. It is advised to replace gaskets (sold separately) when replacing carburetor to ensure top performance. To complete this repair you would need a torx screwdriver. • Remove air cleaner cover, filter and base • Disconnect fuel lines • Remove screws that secure carburetor • Remove old carburetor • Install new carburetor using two (2) screws • Re-connect fuel lines • Re-assemble and test the unit

This air filter and choke cover assembly is designed for small gas-powered outdoor equipment to protect the air filter and support proper choke operation. Made from durable plastic, it helps keep dirt and debris out of the engine intake while maintaining correct airflow for reliable starting and performance. It’s a simple, direct replacem...Read moreent for cracked, damaged, or missing covers to restore proper engine protection and operation.

This upper tube is sourced from the original manufacturer for use in blowers. It is a plastic, cylindrical tube that is connected to the blower nozzle on one end and the lower tube on the other. Its purpose is to facilitate the flow of pressurized air through the blower nozzle. If the upper tube becomes cracked, clogged, or falls out of a...Read morelignment, it can result in reduced airflow and inconsistent blower performance. Replacing the upper tube is an easy repair. Simply twist and pull it off the blower and insert the new one in its place. Insert and twist the new tube until it is locked in position.