41AR2BEG883 MTD Leaf Blower / Vacuum - Overview

This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with trimmers and blowers. The gasket is used to seal the connection between the carburetor and the air cleaner assembly. It is recommended to replace gaskets when servicing the motor to ensure proper seals when the parts are reassembled. This item is available as an individual replacement part.

This is a foam air filter designed for use within various models of outdoor power equipment like trimmers and leaf blowers. This foam filter measures approximately 3-inches in length and fits within the air filter assembly to prevent contaminants from entering your equipment. Air filters commonly build up with dust and dirt over time, and...Read more will need to be replaced every so often, and regularly inspecting them for build ups can reduce the amount of extra maintenance that is required. If your air filter is clogged, it will lead to worse performance from your equipment, like difficulty starting or not starting at all, and can even damage the carburetor and engine. To replace the air filter, remove the cover for the air filter housing, and remove and dispose of the old filter. Rub a small amount of oil into the new filter before installing it and securing the air filter cover.

This is a genuine OEM sourced part which is specially made for use with Craftsman handheld lawn and garden equipment. Its purpose is to deliver electric current from the ignition system to the combustion chamber. It will ignite the air fuel mixture by the spark. Unfortunately, over time a spark plug can wear out or it may get damaged even...Read moretually requiring a replacement to ensure peak performance. Keep in mind this high-quality spark plug is made of durable materials and is sold individually. Please make sure to refer to the owners manual of your model for the correct location and application of this component.

This is an OEM insulator assembly that is used to protect the carburetor from engine heat and features various seals and hardware made of plastic, steel and rubber. It fits in between the carburetor and cylinder to prevent excessive heat from affecting the performance and operation of the carburetor. It is recommended that you use protect...Read moreive gloves, a screwdriver, and other tools for the replacement process, so check your model for what tools you will need for installation.

This is a genuine OEM harness with metal frame. It has been sourced directly from the original manufacturer and comes pre-attached to a metal frame. This harness is used with backpack blowers. It is padded on the straps and back area for comfort during machine use. This part includes all buckles, but a replacement buckle is available sepa...Read morerately as part # 731-06191. Attachment screws are not included with this piece; the screws from the old harness will need to be reused. Note that the Hip Belt Harness strap is not included and is sold separately as part # 753-06340. This harness is sold individually.

This is a genuine replacement part manufactured for use with leaf blowers. The plastic nozzle funnels the air exiting the blower tubes. Since the nozzle is at the end of the blower tubes it can make contact with the ground or other surfaces which can wear down the nozzle. This nozzle is available as an individual replacement part, please see model diagram for any additional parts.

This is a genuine replacement part manufactured for use with gas-powered lawn and garden equipment. The insulator o-ring is used to form a seal between the insulator assembly and the cylinder. This o-ring is available as an individual replacement part and is included with the insulator assembly part number 753-06189.

This is an original replacement part manufactured for use with outdoor power equipment. The flywheel has magnets on its edge and when it spins against the armature magneto it generates an electric signal that is sent to the spark plug to generate a spark. The main reason to replace a flywheel is damage to the portion that connects to the engine. This flywheel is sold individually.