41AN650G034 MTD Trimmer - Overview

The Fuel Pick Up Line with Filter is an OEM plastic part used to filter and deliver fuel to the carburetor. If broken, the engine will not get fuel and the part should be replaced. This part is rated "Easy" to install and only requires a set of pliers.

The Fuel Return line is a blue plastic tube which attaches to the purge bulb and fuel tank in order to return fuel back to the tank after the primer bulb is pressed. It is rated "Easy" to install and requires pliers and a screwdriver.

This is a genuine anti-rotation screw from the Ryobi manufacturer. The metal screw is compatible with many lawn and garden trimmers. This item works to help secure the clutch cover assembly. This part is sold individually. A screwdriver is needed in making the repair.

This is a foam air filter designed for use within various models of outdoor power equipment like trimmers and leaf blowers. This foam filter measures approximately 3-inches in length and fits within the air filter assembly to prevent contaminants from entering your equipment. Air filters commonly build up with dust and dirt over time, and...Read more will need to be replaced every so often, and regularly inspecting them for build ups can reduce the amount of extra maintenance that is required. If your air filter is clogged, it will lead to worse performance from your equipment, like difficulty starting or not starting at all, and can even damage the carburetor and engine. To replace the air filter, remove the cover for the air filter housing, and remove and dispose of the old filter. Rub a small amount of oil into the new filter before installing it and securing the air filter cover.

This is a genuine replacement part from original manufacturer. It is compatible with Ryobi, MTD, Troy-Bilt, Yard Man, and Bolens machines. It's used with a variety of power tools including trimmers, tillers, and blowers. O-rings create a seal between solid parts, retaining pressure. Because many machines use more than one type of O-ring, ...Read moreuse care to ensure that the right one is being used in the right spot. This ring is sold individually.

This is a genuine OEM replacement part. it is sold individually. The Bump Head Knob Assembly is the part of the trimmer that you bump on the ground to advance the cutting line from the spool. Because of the abuse this part gets, it is advisable to order an extra one so you have on on hand. LEFT HAND THREADED

The Clutch Drum is a silver, metal part used to transmit power from the engine to the drive shaft. Installation is rated "Medium" difficult and will require a screwdriver, wrench set, and torx wrenches. This part attaches to the clutch assembly. If broken, the clutch will slip and you will lose drive power. If this happens, the part must be replaced.

This is a genuine item that is supplied by the original equipment manufacturer for use with trimmers. The metal clutch goes between the clutch drum and the clutch washer. It helps to spin the cutting head and the flex shaft. It may require a screwdriver and a hammer for installation. This clutch is available as an individual replacement part and comes with a washer.

This is an Genuine OEM replacement part used on Gas-Powered Handheld Trimmers. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won't start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carburetor. Pull th...Read moree starter rope. If the engine starts and then quickly dies, the carburetor is likely the problem. This Assembly includes a Metal Body Carburetor with Rubber Primer Bulb and Two (2) Rubber Fuel Lines. When replacing Carburetor it is advised that you also replace Carburetor Gaskets to ensure proper Air Tight Seal for optimum performance. You will need a Screwdriver to perform this repair.

This air filter and choke cover assembly is designed for small gas-powered outdoor equipment to protect the air filter and support proper choke operation. Made from durable plastic, it helps keep dirt and debris out of the engine intake while maintaining correct airflow for reliable starting and performance. It’s a simple, direct replacem...Read moreent for cracked, damaged, or missing covers to restore proper engine protection and operation.

This genuine OEM sourced item is specially designed for use with gas powered lawn and garden equipment. This rope is part of the recoil starter mechanism which allows user to pull-start the engine. One durable nylon rope is included per order, please note the plastic grip handle is sold separately.

This high quality OEM sourced replacement throttle cable that is specially designed for use with handheld trimmers. Throttle cable is connected to the carburetor and it stops the engine when you shift the lever to the full choke position. One durable rubber insulated metal cable is included per order.