41AJGC-C954 MTD Tiller - Overview

This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws...Read more used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. The screw is sold as an individual replacement part.

This silver metal lock washer helps prevent the nut on the drive belt pulley shaft from backing off during operation, it has a 5/16-inch inner diameter and a 1/2-inch outer diameter. one washer is included, replace it if fatigue or damage allows the connected shafts to spin freely, verify fit using the equipment model or owner manual

This genuine component is supplied directly from the original equipment manufacturer for use with Ryobi and MTD lawn and garden equipment. It is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hex washer screw. Ke...Read moreep in mind this high-quality part is made of durable metal and is sold individually.

This Bell-Wash Flat Washer is an OEM part that measures .40 inches I.D. x 88 inches O.D. This washer is a silver, metal, washer sold individually. This part is rated as Easy to install by customers. If missing or damaged (likely due to fatigue) it should be replaced. Refer to your owners manual to ensure this is the correct part for you.

This T-knob, is a manufacturer-approved replacement part for use in tillers and lawn tractors. It is a T-shaped handle used in a variety of applications, such as adjusting the equipment RPMs (revolutions per minute) or it can be attached to the depth bar and used to control the depth that the tines or blades penetrate the soil, for tasks ...Read moresuch as tilling soil or cutting grass. However, if the threads on the bolt wear out or the plastic body of the knob becomes damaged, you will not be able to control your equipment using the knob. A faulty T-knob may result in inconsistent speed, inaccurate depth settings, uneven tilling, or inefficient grass cutting. Remove the fasteners that secure the t-knob and pull it off the equipment. It is recommended to replace the fasteners at the same, especially if they are worn down or damaged. Place the new T-knob in position and secure it with the fasteners

This authentic manufacturer-sourced component is specially designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. Make sure to refer to the diagrams for your specific model for the exact location and the correct application of this screw. Keep in ...Read moremind this high-quality product is made of durable metal and is sold as an individual item. A wrench will be needed to secure or remove it.

This accessory hanger is a high quality item that is specially manufactured for use with MTD, Troy-Bilt and Ryobi handheld lawn and garden equipment. It used to hang the tool for easy storage and quick access. Please note one durable plastic hanger is included per order.

The metal screw attaches to the block steering. It is a genuine OEM sourced part which is specially designed for use with chippers, shredders, edgers, lawn tractors, and snowblowers made by MTD, Yard Machines, Troy-Bilt, Bolens, and Yard Man. This item is available as an individual replacement. A wrench will be necessary during the instal...Read morelation of this part. It will need to be replaced if it becomes stripped or broken.

This is an original Craftsman replacement part manufactured for use with paint sprayers, tillers, spreaders, and yard vacuums. The special knob is commonly used as a wing nut, and its application can vary depending on the model of equipment. This knob is available as an individual replacement part, please see model diagram for part location and usage.