41AEZ36C912 (2014) Cub Cadet Trimmer - Overview

This genuine OEM glide cap, is also referred to as a fixed line head. It protects the cutting line of your string trimmer and prevents it from coming into contact with sidewalks or curbs. Housing the cutting head assembly, it guides and helps the trimmer smoothly glide along the edges without causing damage to the line or the machine. The...Read more glide cap is typically found at the bottom end of the trimmer head, where the cutting line extends. The cap is made out of plastic and wears out over time, especially when it rubs against the ground. You may also notice that the string feeds outside of the head uncontrollably. To remove the glide cap, simply depress its locking tabs on each side and pull it away from the cutting head. Install the new glide cap by aligning it with the correct notches on the trimmer, pushing it into place, and using a screwdriver to secure the tabs. Please bear in mind that the glide cap is sold separately from the rest of the cutting head assembly.

This is a genuine replacement part is designed for use with handheld trimmers. It is sourced from original manufacturer and it is sold individually. This split boom coupler includes metal coupler, knob and screws needed to fasten the upper shaft housing to the lower boom assembly. To complete this repair you would need a phillips head screwdriver.

This is a genuine replacement part manufactured for use with trimmers. The blade assembly is used to trim excess trimmer line to prevent damage to the guard. The blade assembly includes the hardware used to mount the blade and the assembly is available as an individual replacement part.

The metal screw attaches to the gear box housing assembly. This is a genuine Ryobi, Troy-Bilt, Bolens, Yard Man, MTD, and Cub Cadet replacement part for use in tillers and trimmers. This item is available as an individual replacement part even though several may be needed. A torx screwdriver will be needed during the replacement of this part. It will require replacing if it becomes stripped or broken.

Nozzle blwr atach