41AD396C799 MTD Trimmer - Overview

Fuel tanks are responsible for storing and supplying fuel, like gasoline, for an engine. This fuel tank assembly is designed for and compatible with various models of trimmers and includes the plastic fuel tank and fuel cap, securing screws, and 2 fuel lines. To best maintain your fuel tank, make sure to inspect the fuel filter regularly ...Read morefor any clogs that could affect equipment performance, and replace it when necessary. Over time and through aging, fuel tanks themselves can wear down and crack, or get severely clogged, leading to issues like contamination rendering the tank unsafe to use, and in need of replacement. You must drain the fuel from the tank before you replace it, and you will need a screwdriver or wrench to remove any panels and securing screws containing the tank.

This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with trimmers and blowers. The gasket is used to seal the connection between the carburetor and the air cleaner assembly. It is recommended to replace gaskets when servicing the motor to ensure proper seals when the parts are reassembled. This item is available as an individual replacement part.

This clutch assembly is a genuine OEM replacement kit for outdoor lawn equipment. The kit includes the clutch drum, clutch, clutch washer, and screw. The clutch assembly transfers power from the engine to the cutting attachment which allows you to operate the equipment. Over time, the clutch assembly may malfunction due to normal wear and...Read more tear or accidental damage. If the small clutch assembly fails, the engine will likely stall, and the cutting attachment will not be able to engage. To remove the clutch assembly, first bind the piston to prevent it from rotating. You can do this by removing the spark plug and inserting a length of rope into the cylinder with a few inches remaining outside. Remove the clutch cover and use a clutch removal tool to remove the nut that secures the assembly. Pull the old assembly from the crankshaft and position the new assembly in its place, ensuring it is securely fitted.

This is a manufacturer approved O-Ring designed for lawn and garden equipment. This is the O-Ring that provides an Air Tight seal between Carburetor and Cylinder Head. If doing maintenance on carburetor it is recommended to replace the O-Ring instead of re-using the old one. Over time rings and seals tend to dry out and would no longer provide proper seal compromising engines performance.

This air filter is an original sourced directly from Craftsman. The filters purpose is to keep dirt, dust and other contaminants from entering the carburetor and engine. You can clean this foam filter by putting it in a clean plastic bag with a little oil and rub the oil into the filter, then remove the filter and squeeze it in a paper towel to remove the excess oil. This is an individually sold part.

Lower boom assembly

This is a genuine anti-rotation screw from the Ryobi manufacturer. The metal screw is compatible with many lawn and garden trimmers. This item works to help secure the clutch cover assembly. This part is sold individually. A screwdriver is needed in making the repair.

This is a genuine replacement part manufactured for use with trimmers. The kit includes the metal retaining washer which is used with the blade, and spool cutting heads. The kit also includes the nut that fastens the blade to the gearcase, the kit is sold individually.

This is an OEM insulator assembly that is used to protect the carburetor from engine heat and features various seals and hardware made of plastic, steel and rubber. It fits in between the carburetor and cylinder to prevent excessive heat from affecting the performance and operation of the carburetor. It is recommended that you use protect...Read moreive gloves, a screwdriver, and other tools for the replacement process, so check your model for what tools you will need for installation.

This is a genuine replacement part is designed for use with handheld trimmers. It is sourced from original manufacturer and it is sold individually. This split boom coupler includes metal coupler, knob and screws needed to fasten the upper shaft housing to the lower boom assembly. To complete this repair you would need a phillips head screwdriver.

This carburetor is for line trimmers. Carburetor mixes air and gas before the fuel mix goes to the engine. Wear work gloves to protect your hands and work in a well-ventilated area during this repair.

This is an original replacement part manufactured for use with trimmers. This coated steel blade is used to get more use out of trimmers. The strong blade is used to cut tall grass and brush when clearing an area. The blade is sold individually.