41AD2S8C912 (2012) Cub Cadet Trimmer - Overview

This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with trimmers and blowers. The gasket is used to seal the connection between the carburetor and the air cleaner assembly. It is recommended to replace gaskets when servicing the motor to ensure proper seals when the parts are reassembled. This item is available as an individual replacement part.

This fuel tank cap fits on top of the fuel tank in your lawn equipment. It prevents gasoline from spilling out and keeps moisture and dirt from entering the tank. If the cap is damaged, it will be visibly broken and may not fit snugly on your fuel tank. This can allow debris to enter the fuel tank, which can cause engine problems. Thus, i...Read moret is important to replace a damaged cap immediately. To remove the cap from your machine, start by turning your machine off and letting it cool down. Then, twist the cap counterclockwise to loosen it before lifting the cap straight up. Please note that this OEM-certified replacement part is sold separately.

This is a foam air filter designed for use within various models of outdoor power equipment like trimmers and leaf blowers. This foam filter measures approximately 3-inches in length and fits within the air filter assembly to prevent contaminants from entering your equipment. Air filters commonly build up with dust and dirt over time, and...Read more will need to be replaced every so often, and regularly inspecting them for build ups can reduce the amount of extra maintenance that is required. If your air filter is clogged, it will lead to worse performance from your equipment, like difficulty starting or not starting at all, and can even damage the carburetor and engine. To replace the air filter, remove the cover for the air filter housing, and remove and dispose of the old filter. Rub a small amount of oil into the new filter before installing it and securing the air filter cover.

This authentic item is supplied directly from the original equipment manufacturer for use with handheld trimmers. The flexible drive shaft is secured in the lower boom assembly in order to rotate the trimmer head. It provides an identical replacement for a missing or a faulty part that was installed on a new unit. Please make sure to chec...Read morek the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality shaft is made of durable metal and is sold individually.

This is an authentic part which is sourced from original equipment manufacturer. It is generally used on handheld trimmers/edgers. This nut is designed to secure cutting blade to the trimmer shaft. Please note you would need a properly sized wrench when installing/removing this nut. Includes one (1) nut per order.

The metal screw attaches to the gear box housing assembly. This is a genuine Ryobi, Troy-Bilt, Bolens, Yard Man, MTD, and Cub Cadet replacement part for use in tillers and trimmers. This item is available as an individual replacement part even though several may be needed. A torx screwdriver will be needed during the replacement of this part. It will require replacing if it becomes stripped or broken.

This is an authentic replacement part that has been sourced to be used with trimmers from MTD and Troy-Bilt. The plastic bump knob attaches to the bottom of the cutting head and is used to impact the ground to release trimmer line. This item is available as an individual replacement part.

This genuine manufacturer-sourced part is specially designed for use with handheld trimmers. The part helps to drive the blade, please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of this hardware. It is an identical replacement for a missing or a faulty blade ...Read moredriver that was installed on a new unit. Keep in mind this high-quality item is made of durable metal and is sold individually.