41AD2C7C912 (2010) Cub Cadet Trimmer - Overview

Fuel tanks are responsible for storing and supplying fuel, like gasoline, for an engine. This fuel tank assembly is designed for and compatible with various models of trimmers and includes the plastic fuel tank and fuel cap, securing screws, and 2 fuel lines. To best maintain your fuel tank, make sure to inspect the fuel filter regularly ...Read morefor any clogs that could affect equipment performance, and replace it when necessary. Over time and through aging, fuel tanks themselves can wear down and crack, or get severely clogged, leading to issues like contamination rendering the tank unsafe to use, and in need of replacement. You must drain the fuel from the tank before you replace it, and you will need a screwdriver or wrench to remove any panels and securing screws containing the tank.

This is an authentic Craftsman replacement part that has been sourced from the original manufacturer to be used with trimmers and blowers. The gasket is used to seal the connection between the carburetor and the air cleaner assembly. It is recommended to replace gaskets when servicing the motor to ensure proper seals when the parts are reassembled. This item is available as an individual replacement part.

This is a foam air filter designed for use within various models of outdoor power equipment like trimmers and leaf blowers. This foam filter measures approximately 3-inches in length and fits within the air filter assembly to prevent contaminants from entering your equipment. Air filters commonly build up with dust and dirt over time, and...Read more will need to be replaced every so often, and regularly inspecting them for build ups can reduce the amount of extra maintenance that is required. If your air filter is clogged, it will lead to worse performance from your equipment, like difficulty starting or not starting at all, and can even damage the carburetor and engine. To replace the air filter, remove the cover for the air filter housing, and remove and dispose of the old filter. Rub a small amount of oil into the new filter before installing it and securing the air filter cover.

This is a genuine replacement part is designed for use with handheld trimmers. It is sourced from original manufacturer and it is sold individually. This split boom coupler includes metal coupler, knob and screws needed to fasten the upper shaft housing to the lower boom assembly. To complete this repair you would need a phillips head screwdriver.

Is your dishwasher door not staying shut? That's frustrating! The 2 Door Latch could be just the fix you need. It's a small yet highly important part that makes sure your dishwasher door stays tightly closed while your machine 2ts to work on your dishes. Placed at the top of your door, it's the hero behind the scenes, ensuring perfect eff...Read moreiciency every time. But why is it so crucial? Well, without a properly latching door, your once trustworthy dishwasher can ineffective or even unsafe. With the 2 Door Latch, you can return your machine back to its former glory, working smoothly like brand new. The good news? You don't need to call a professional! Installation is so straightforward, you can do it yourself. Just remember to switch off your power supply first, as safety always comes first. In addition, it might be wise to wear work gloves to protect your hands. So, take the worry out of dishwashing. With the 2 Door Latch, it?s super easy to 2t your dishwasher running perfectly again. Trust us, your dishwasher will thank you.

This is a genuine manufacturer sourced replacement fuel cap assembly. It is supplied directly from original manufacturer for use with a variety of gas powered lawn and garden equipment. It is used to keep the fuel in the tank. If the fuel cap is damaged or lost it should be replaced for the unit to function safely. This is a plastic fuel cap that is sold individually.

The anti-rotation screw attaches to the lower handle clamp. This item is priced individually and is made out of metal. It is a genuine replacement part used in compatible tillers, trimmers, and blowers made by Ryobi, Troy-Bilt, MTD, Bolens, Yard Man, Yard Machines, and Cub Cadet. A torx screwdriver will be needed during the installation process. It will need to be replaced if it becomes stripped or broken.

This part is available as an individual replacement part and is made of metal. The housing assembly fits between the adapter and the upper clamp assembly. It will need to be replaced if it breaks. During the replacement process, a screwdriver, a set of pliers, and a wrench set may be required. This item is an original part from MTD, Troy-Bilt, and Cub Cadet for use in trimmers.