41ABESPG372 (2009) MTD Leaf Blower / Vacuum - Overview

This replacement vacuum bag collects and stores debris in your handheld blower. It is made from fabric and has an oval inlet and a fastening mechanism. A broken vacuum bag will leak or have visible tears, holes, or frayed edges. If it becomes clogged, you may notice reduced suction from your blower. It is strongly recommended to replace a...Read more broken vacuum bag assembly promptly, as debris can escape during blower operation. To remove the bag, locate its attachment point. You need to depress the two tabs at the oval end of the bag to release it from your machine. Please be aware that this authentic OEM vacuum bag is sold individually.

This power connection wire assembly is an original part that is specially manufactured for handheld electric blowers. This assembly is comprised of rubber insulated wires, and it mounts into the main housing exposing the brass terminals. An extension cord would plug into the terminals on the wire assembly providing power to the motor. Thi...Read mores part is sold individually, please note the switch is sold separately. When replacing the part a screwdriver would be needed to separate the main housing halves.

This is a high quality OEM supplied replacement hardware that is specially produced for use with lawn and garden equipment. It is a standard hardware that has multiple uses depending on the unit, please make sure to check appropriate diagrams for correct location and use of this screw. Please note one durable metal torx screw is included per order.

This is a genuine replacement part manufactured for use with leaf blowers. The special impeller is driven by the motor and the fan blades make the wind that blows out of the blower tubes. This impeller is available as an individual replacement part.

This shoulder strap is an authentic manufacturer-sourced part that is designed for use in a variety of lawn and garden equipment. It is an adjustable strap made of durable synthetic material that is worn over the shoulder. The strap features one plastic slide adjuster and one metal clasp that secures it to the equipment. It is designed to...Read more reduce strain on the arms, shoulders and back when using the equipment over a long period. It also stabilizes the equipment for easier handling. Over time the strap can wear down, or the clasp and adjuster may break, leading to discomfort and strain. Detach the old strap from the equipment and clasp the new strap onto the attachment points. Adjust the length using the plastic adjuster until the strap sits comfortably on your shoulder.

This is an authentic OEM part sourced directly from the original manufacturer. It is a black plastic part that snaps onto the motor housing. It holds the vacuum bag which is used to capture debris during vacuum mode. This part is sold individually.

This is a genuine replacement part that has been sourced from the original manufacturer to be used with blower/vacuums. The tube assembly includes both halves to direct or focus air when vacuuming or blowing. This item is available as an individual replacement part, a wrench and a screwdriver are required to install this item.