This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. The main reason you would replace this screw is if the old screw is missing or damaged. This part is sold individually and is an OEM part sourced directly from the manufacturer.
This is a bellow, though it may also be known as a door boot seal, and it is a part for your washing machine. The function of the bellow is to prevent leaks by forming a seal in between the wash tub and the door of the washing machine. The boot gasket measures to be almost 21 inches by 21 inches and is gray in color. Take caution, as this...Read more part is prone to tearing if the washer is frequently overloaded. To complete this repair, you will need a Phillips screwdriver, a number two square bit, and a pair of needle-nose pliers.
This washer shock absorber mounting pin is a small but essential fastener that secures the shock absorber to the outer tub of a front-load washing machine. By holding the shock absorber firmly in place, it helps stabilize the tub during wash and spin cycles, reducing excessive vibration, shaking, and movement. Made from durable materials ...Read moreand designed for a precise fit, the pin supports smooth operation and protects other components from stress caused by unbalanced motion. Replacing a worn, broken, or missing mounting pin can help restore proper vibration control, improve washer stability, and prevent noise or damage during operation.
This is a shoulder screw and is used in conjunction with multiple appliances within your home. This specific model is size 10, and it has 16 threads to an inch. This part is made entirely of metal and is chrome-colored. The shoulder screw measures to be less than an inch long, and has a flat bottom and top. In general screws are typically...Read more made of metal, and the purpose of them is to be used as a fastener when attaching one piece/part to another. This model is sold individually.
This part is the replacement screw for your washer. The head is approximately inch in diameter and the screw is approximately 3/4 inch in length. It is made of metal and is sold individually. This is an authentic OEM part sourced directly from the manufacturer.
Ensure proper drainage and protect your washer from damage with this durable tub-to-pump hose, designed for front-load washing machines. This genuine replacement part carries water from the tub to the drain pump and features a built-in coin trap to catch small objects that may fall from pockets during the wash cycle. Made from sturdy blac...Read morek rubber for long-lasting performance, the hose measures approximately 9.75 inches in length. Installation is simple—unplug the washer, shut off the water supply, and wear gloves for safety before removing the old hose and securing the new one in place.
This genuine OEM drain pump is an essential component for removing water from the washer tub during the drain cycle. Built from durable materials, including impact-resistant plastic and stainless steel components, it ensures reliable performance and prevents leaks. Operating at 120V 60Hz, this pump helps maintain proper drainage and smoot...Read moreh cycle transitions. Common signs of failure include the washer not draining, unusual noises during operation, water leaking from the base, or error codes related to drainage. Installation is straightforward—disconnect power, remove the old pump, and secure the new one in place for optimal functionality.
This boot retainer spring is a critical internal component that secures the rubber door seal (also known as the bellow) to the outer drum of the washing machine. Constructed as a corrugated tube-style clamp, it maintains the seal’s position throughout the wash cycle, preventing water leaks and ensuring proper door alignment. A compromised...Read more spring may result in water escaping from the front of the washer or the seal becoming loose. This genuine replacement part is compatible with a wide range of washing machines from Frigidaire, Electrolux, Gibson, Kelvinator, Kenmore, and other affiliated brands. Installation typically involves removing the front panel or door boot, positioning the spring evenly around the seal, and ensuring it is securely fastened to maintain a watertight fit.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael - For model number 41741102000
February 10, 2023
On dispenser drawer Part diagram 45 what about replacing Part 50 Detergent and softer tray that fits in drawer
Hello Michael, thank you for writing in. On the Diagram, Item 45, PS11766113 is the Drawer. And, Item 50, is only Drawer Conveyer PS2350419 which attaches to the underside of the Dispenser Drawer. The drawer front and housing have been discontinued. We hope this helps.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Original bellow had 2 largish holes in the upper left quadrant; random leaking.
20 of 25 peoplefound this instruction helpful.
Michelle from Loves Park, IL
Very Difficult
1- 2 hours
Pliers, Screw drivers
Bought new part. #1 Lesson learned: Always inspect the actual part number of the ordered/received part. Verify with number marked on the item somewhere. We did not do this and turned out we reinstalled a slightly smaller bellow (wrong part number received in shipment). We were able to fully install it but it was minutely not laying perfec
... Read moretly around the diameter. So minor we did not notice. We did have great difficulty installing though. Anyway, after 1st test run, bellow already had developed a small hole in bottom right quadrant from rubbing on the drum. Left a bunch of gray powdery debris on the drum too. We did not realize error until that point. Took bellow off again to verify part number on it. It was wrong. That explained why the door was so very tight to close and difficult to open. Other than all that, use the video to do the install. It was free to view and easy to follow.
Read less
Was this helpful?
Thank you for voting!
ELECTRONIC COMPONENT
4 of 4 peoplefound this instruction helpful.
Elmer from JACKSONVILLE, FL
Very Difficult
More than 2 hours
Still waiting on the part. It apparently is on back order and I'm still waiting to get the part to try and repair the dryer.
I estimate an hour to replace the part if I ever get the part.
Was this helpful?
Thank you for voting!
washer stops in middle of cycle and E53 appears on the screen
3 of 3 peoplefound this instruction helpful.
Baruch from HURLEYVILLE, NY
A Bit Difficult
30 - 60 mins
Pliers, Screw drivers
1 you have to order a new motor control board 2 unscrew the back panel 3 unscrew the top panel 4 unscrew the bracket 5disconnect the old motor control board 6 connect the new motor control board
My Orders
