415 Shindaiwa Chainsaw - Overview

The Fuel Filter is a white and silver, individually sold, steel part. It reuires pliers to install and its installation is rated as Easy. The part attaches inside of the fuel tank and is used to clean the fuel of debris. It should be changed regularly. Check your owners manual for the recommended replacement schedule for your engine. ...Read moreIf the fuel is leaking or their is a blockage, you will know the part is broken and will likely need to be replaced. To check for small leaks, feel around for dampness and the smell of fuel.

This OEM Clip is a silver, steel part, which is sold individually. The part secures the fuel line to the fuel filter and is rated as Easy to install. You will know you need a new one if there is a leak around the hose where this clip is used to secure it, or if the fuel line detaches.

It is a high-quality OEM sourced item that is designed for use with Shindaiwa gas powered chainsaws. The purpose of this tube is to deliver the fuel from the tank to the carburetor. When you press the primer bulb, it will purge all the air out of the carburetor and fill its chambers with fuel. The excess fuel is then forced back into the ...Read moretank through the return line. Over time these lines tend to become brittle and may begin to crack eventually requiring a replacement. Keep in mind this item is made from durable rubber and is sold individually.

This OEM Hex Socket Bolt is a black, 5x12mm, individually sold, metal part. A Hex Socket and Torque Wrench can be used to secure the part in place by torqueing to the manufacturer specifications. The part must be replaced when damaged (likely due to fatigue), for example if it is rounded off, has stripped threads, or is missing altogether.

This is a genuine manufacturer sourced replacement washer that is designed for use with Shindaiwa and Echo handheld lawn and garden equipment. It helps to distribute the pressure evenly between two connected parts, for proper application please make sure to check appropriate diagrams of your unit. This part is made from durable metal and it is sold individually.

This replacement spring washer is a genuine OEM hardware that is commonly utilized on Shindaiwa and Echo lawn and garden equipment. It has multiple uses depending on the equipment, for correct location and application for this party please make sure to check appropriate diagrams for your equipment. Please note this durable metal spring washer is sold individually.

This replacement fuel tube is a high quality OEM sourced item that is designed for use with Shindaiwa gas powered chainsaws. The purpose of this tube is to deliver the fuel from the tank into the carburetor. When you press the primer bulb, it will purge all the air out of the carburetor and fill its chambers with fuel. The excess fuel is ...Read morethen forced back into the tank through the return line. Over time these lines tend to become brittle and may crack eventually requiring replacement. This item is made from durable rubber material and it is sold individually.

This manufacturer approved Spark Plug Terminal Cap is a part that is located inside the spark plug boot, and attaches to the spark plug to transfer the electrical current between the two. If broken, the spark plug will no longer get the electrical current it needs, and the part must be replaced. Installation is rated as "Easy" by customer...Read mores and requires pliers. This bronze, metal part is electrical and comes individually sold. Refer to your make, model and diagrams to ensure this is the correct part for you.

The OEM M8 Lock Washer (Spring Washer 8) is an 8mm silver, metal part. It can be installed with a wrench set and socket set. It prevents bolts or nuts from loosening. If broken, the bolt or nut it is securing as well as the part may be loose. If this happens it should be replaced. Refer to your make, model, and diagrams to ensure this is the correct part.

This is a genuine OEM sourced replacement part which is specially designed for use with Echo and Shindaiwa handheld lawn and garden equipment. It is a standard hardware which has multiple applications, please make sure to check the appropriate diagrams of your model for the correct location and application of this item. Keep in mind this high-quality screw is made of durable metal and is sold individually.

The metering diaphragm fits between the metering diaphragm gasket and the air purge body assembly. This part is available individually and is made of a thin material that can break easily. It is a genuine item that is supplied by the original equipment manufacturer for use with trimmers, edgers, blowers, and chainsaws made by Echo and Shindaiwa. A screwdriver may be needed when replacing the diaphragm.

This is an authentic replacement part manufactured for use with outdoor power equipment. The diaphragm gasket seals the carburetor and fits between the carburetor and the diaphragm. It is recommended to replace the gaskets when servicing the carburetor to ensure good seals when it is reassembled. This gasket is sold as an individual replacement part.