EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

41250B119 General Electric Dishwasher - Overview

Diagrams for 41250B119

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Silverware Basket (Grey) – Part Number: WD28X265
$79.80
In Stock
Silverware Basket (Grey)
★★★★★
★★★★★
(34)
Part #WD28X265
The silverware basket, used for dishwashers, is in the bottom of the dishrack. The basket is used to hold eating utensils such as spoons, forks, and knives. If the basket is worn out or broken, you should replace it with this part. No tools are required as it is an easy replacement. If you need further guidance refer to the instructions provided by the manufacturer. For safety precautions make sure to unplug the dishwasher and wear gloves.
Rinse Aid Fill Cap – Part Number: WD12X10284
$34.74
In Stock
Rinse Aid Fill Cap
★★★★★
★★★★★
(14)
Part #WD12X10284
This part helps keep the rinse aid the dispenser until its needed.
Dishwasher Water Inlet Valve – Part Number: WD15X93
$52.98
In Stock
Dishwasher Water Inlet Valve
★★★★★
★★★★★
(8)
Part #WD15X93
This water inlet valve is specially designed for those dishwashers that fit under the counter from 1974 To Present. The valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
Third Level Spray Arm – Part Number: WD28X10103
$55.29
Special Order
Third Level Spray Arm
★★★★★
★★★★★
(5)
Part #WD28X10103
Water is forced through this spray arm by the unit's pump and motor assembly. The force of the water propels the spray arms, spraying water and detergent onto the dishes on the dishrack. This spray arm does not come with the screws.
Dishwasher Hose Clamp Kit – Part Number: WH1X2036
$26.40
In Stock
Dishwasher Hose Clamp Kit
★★★★★
★★★★★
(2)
Part #WH1X2036
This is a water hose clamp kit for a variety of appliances including dishwashers and washers. This is a genuine replacement part. The kit includes two hose clamps. The smaller of the two is 1 inch in diameter while the larger one is 2 inches in diameter. The hose clamps secure the end of the water hose in place to prevent the hose from leaking. If you notice leaking from the hose of your appliance, you may need to replace this kit. Protect your hands with work gloves during this repair to avoid injury.
Door Latch Knob – Part Number: WD9X351
$21.45
In Stock
Door Latch Knob
★★★★★
★★★★★
(3)
Part #WD9X351
This knob is attached to the dishwasher door latch mechanism.
Screw Kit - Package of 12 – Part Number: WE2X263D
$25.26
Special Order
Screw Kit - Package of 12
Part #WE2X263D
SCREW – Part Number: WD2X248
$15.00
Special Order
SCREW
Part #WD2X248
SPRING SET – Part Number: WD3X721
$60.51
Special Order
SPRING SET
Part #WD3X721
SCREW – Part Number: WD2M101
$15.00
Special Order
SCREW
Part #WD2M101
Assembly SWITCH – Part Number: WD6X183
No Longer Available
Assembly SWITCH
Part #WD6X183
NUT STRIP – Part Number: WD1X1007
$8.55
Special Order
NUT STRIP
Part #WD1X1007

Common Symptoms of the 41250B119

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Insufficient fill water, dishes not getting clean (valve diaphram had ruptured)
71 of 77 people found this instruction helpful.
  • Don from Mount Vernon, IL
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers, Wrench set
1. Remove lower cover skirt.
2. Shut of water at undersink valve.
3. Unplug power cord or turn off circuit breaker.
4. Disconnect water supply line from fill valve.
5. Unplug the electrical connector from the valve.
6. Remove the 2 valve mounting bracket screws.
7. With loose valve in hand, rotate to g ain access to allow release of outlet hose clamp for hose removal.
8. Remove brass fitting from old valve and install on new valve. Use teflon tape on the pipe threads only.

Install new valve by reversing the procedure.
Was this helpful?
Thank you for voting!
Basket was lost
49 of 52 people found this instruction helpful.
  • Joseph from Elmendorf, TX
  • Really Easy
  • Less than 15 mins
Opened package from Parts Select.
Removed Silverware basket from package.
Opened Dishwasher.
Inserted Silverware Basket in rack.
Closed Dishwasher.
Discarded shipping package.
Told wife I fixed Dishwasher.
Sat down & had a beer.
Was this helpful?
Thank you for voting!
Lost Despenser Lid, Droped It And Havent Seen It Since.
26 of 32 people found this instruction helpful.
  • ANNE from SWANNANOA, NC
  • Really Easy
  • Less than 15 mins
Ordered the part, by using the diagram on the ge website identified the part and ordered it right them and when it came (delivered really fast) took it out of the bag and screwed it in the jet dry despenser and is working great.
Was this helpful?
Thank you for voting!