EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

40260119 General Electric Dishwasher - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Silverware Basket (Grey) – Part Number: WD28X265
$79.80
In Stock
Silverware Basket (Grey)
★★★★★
★★★★★
(34)
Part #WD28X265
The silverware basket, used for dishwashers, is in the bottom of the dishrack. The basket is used to hold eating utensils such as spoons, forks, and knives. If the basket is worn out or broken, you should replace it with this part. No tools are required as it is an easy replacement. If you need further guidance refer to the instructions provided by the manufacturer. For safety precautions make sure to unplug the dishwasher and wear gloves.
Drain Valve Shaft Seal – Part Number: WD8X181
$42.12
In Stock
Drain Valve Shaft Seal
★★★★★
★★★★★
(14)
Part #WD8X181
The drain valve shaft seal is a part for your dishwasher drain pump valve. This seal creates a watertight closure around the flapper valve shaft. This part can be accessed through the access panel at the front for a built-in. For a portable dishwasher, consider disconnecting and unplugging the taps and lay on a blanket to access the bottom of the machine. This will need to be replaced if you notice leaking coming from the pump. This part measures approximately 3/8 inches in diameter and is black in color. This is a genuine OEM part that comes right from the manufacturer.
Rinse Aid Fill Cap – Part Number: WD12X10284
$34.74
In Stock
Rinse Aid Fill Cap
★★★★★
★★★★★
(14)
Part #WD12X10284
This part helps keep the rinse aid the dispenser until its needed.
Motor and Pump Kit – Part Number: WD26X10013
$198.71
In Stock
Motor and Pump Kit
★★★★★
★★★★★
(12)
Part #WD26X10013
This is a pump and motor kit for your dishwasher. This assembly replaces many old-style pump and motor kits that were manufactured since 1970. The instructions are included with this kit in to assist you. Take note that this is a completely redesigned kit by the manufacturer and now includes the drain solenoid. You may need to replace this part is if your appliance is leaking, not draining properly, noisy, or will not start or clean your dishes properly.
Impeller and Seal Kit – Part Number: WD19X10032
No Longer Available
Impeller and Seal Kit
★★★★★
★★★★★
(5)
Part #WD19X10032
The impeller and seal kit is used in a dishwasher. The kit includes all the parts needed to do this repair, including the impeller, seal, blade, filter, skidder and skidder holder. If your washer is leaking, not cleaning dishes properly, or not draining, then replacing some parts in the pump can help solve the issues mentioned. The tools needed for this installation project are: 5/16 nut driver, 1/4 inch nut driver, flat-blade screwdriver, Phillips screwdriver, and pliers. Refer to the manual provided by the manufacturer for installation instructions and accurate guidance. Remember to unplug your dishwasher from the power source and wear work gloves as a safety precaution.
Third Level Spray Arm – Part Number: WD28X10103
$55.29
Special Order
Third Level Spray Arm
★★★★★
★★★★★
(5)
Part #WD28X10103
Water is forced through this spray arm by the unit's pump and motor assembly. The force of the water propels the spray arms, spraying water and detergent onto the dishes on the dishrack. This spray arm does not come with the screws.
Armature Link – Part Number: WD1X1316
$43.18
In Stock
Armature Link
★★★★★
★★★★★
(4)
Part #WD1X1316
This is the drain valve solenoid armature link for your dishwasher. This approximately 0.8-inch piece of metal is used to activate the drain valve for your dishwasher and ensure it opens and closes securely during the draining process. If your dishwasher is having draining issues, and your drain pump and filter are not damaged or clogged, this armature is likely broken or worn out, and the cause of your dishwasher issues. Replacing this armature will require needle-nose pliers. This is an OEM part, and it is sold individually.
Drain Solenoid Repair Kit – Part Number: WD21X802
$75.98
On Order
Drain Solenoid Repair Kit
★★★★★
★★★★★
(2)
Part #WD21X802
This kit includes the armature and link assembly. You may need the solenoid bracket which is sold separately. This valve opens in order for the water to drain out of the dishwasher.
Screw – Part Number: WD2X425
$15.30
Special Order
Screw
Part #WD2X425
10-12 x 1/2 inch - Sold individually.
Dishwasher Hose Clamp Kit – Part Number: WH1X2036
$26.40
In Stock
Dishwasher Hose Clamp Kit
★★★★★
★★★★★
(2)
Part #WH1X2036
This is a water hose clamp kit for a variety of appliances including dishwashers and washers. This is a genuine replacement part. The kit includes two hose clamps. The smaller of the two is 1 inch in diameter while the larger one is 2 inches in diameter. The hose clamps secure the end of the water hose in place to prevent the hose from leaking. If you notice leaking from the hose of your appliance, you may need to replace this kit. Protect your hands with work gloves during this repair to avoid injury.
Door Latch Knob – Part Number: WD9X351
$21.45
In Stock
Door Latch Knob
★★★★★
★★★★★
(3)
Part #WD9X351
This knob is attached to the dishwasher door latch mechanism.
Fine Thread Telescoping Tower Power – Part Number: WD22X120
No Longer Available
Fine Thread Telescoping Tower Power
Part #WD22X120
This telescoping power tower comes in three sections.

Common Symptoms of the 40260119

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Basket was lost
49 of 52 people found this instruction helpful.
  • Joseph from Elmendorf, TX
  • Really Easy
  • Less than 15 mins
Opened package from Parts Select.
Removed Silverware basket from package.
Opened Dishwasher.
Inserted Silverware Basket in rack.
Closed Dishwasher.
Discarded shipping package.
Told wife I fixed Dishwasher.
Sat down & had a beer.
Was this helpful?
Thank you for voting!
Motor was getting noisier every time we used the dishwasher. We knew it was just a matter of time before it totally quit.
48 of 53 people found this instruction helpful.
  • Glenn from Clemmons, NC
  • Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers
The most difficult part was removing the dishwasher from below the counter. Once that was complete, I simply turned the washer onto it's front surface to access the pump easier. Simply disconnected the electrical connectors, loosened the three hose clamps holding the hoses to the pump. Lastly removed a stiff arm bracket holding the pum p. Reversed the order to install the new one using a longer bracket provided with the new unit. Hooked up the electrical connections last and slid the washer back in place. The washer runs like new now and is not making noise. The replacement part was a perfect match.
Was this helpful?
Thank you for voting!
dishwasher pump valve leaking at shaft
40 of 47 people found this instruction helpful.
  • richard from las vegas, NV
  • Easy
  • 1- 2 hours
  • Screw drivers, Socket set, Wrench (Adjustable)
took dishwasher out- put on table to work on-removed wire brace- disconected drain outlet- disconnected top drive seal- removed wire clip connector- removed motor unit----------------
installed new motor/drain unit--used new longer wire brac used adapter to connect electical leads-
tightened clamps and bingo it worked and didnt' leak. good job on the supplying of all the necessary adapers.
Was this helpful?
Thank you for voting!