If the microwave exhaust fan is not circulating air properly, there could be an issue with the grease filter. A dirty filter will cause your microwave to run less efficiently and can alter the taste or smell of your food. Filters should be changed every six months for maximum performance. These silver, aluminum filters are sold separately...Read more, and are approximately 13 3/8 inches long x 5 7/8 inches wide. Measure your current filter to assure correct replacement. Check your grease filters regularly for particles and grease buildup to see if cleaning is necessary. If there is any visible damage to the filter, it should be replaced straight away.
The microwave door key (or door latch) ensures that the microwave door closes properly while the microwave is operating. If the door key is broken, the door will not close and the microwave will not start. If you notice that the microwave door is not staying closed, check to ensure that the door key is in working order and is not damaged....Read more This door key is made of plastic and has a spring attached to provide downward tension to keep the hooks engaged. If either of the hooks is broken or does not have any spring tension, you may need to replace the door latch. Before beginning this repair, make sure to unplug the unit and remove the inner door panel to access the door key. This part is also known as a door latch.
If you discover that the glass cooking tray in your microwave is damaged, you may have to replace it to operate the microwave properly. The glass cooking tray connects to the turntable of the microwave and rotates to ensure even cooking. This part is made entirely of glass, and is about 14 inches in diameter. Many of our customers rated t...Read morehis repair as very easy. To complete the repair, simply remove the old cooking tray and replace it with the new one. Be sure to remove any broken pieces with the old cooking tray. This product is sold individually.
This door switch, also known as a safety switch, is a genuine OEM replacement part for microwaves. It is a safety mechanism that sends signals to the microwaves control system, telling it when the door is open/closed. This ensures that the microwave only operates when the door is securely shut and switches off as soon as the door is open....Read more Over time, this switch can become worn out or damaged. A faulty door switch can result in failure to switch the microwave on/off, lack of heat, and running with the door open. To confirm that the door switch is faulty, use a multimeter to test for electrical failure. To remove the faulty switch, disconnect the wiring connectors and take note of where they are positioned. Place the new switch in position and reattach the wiring connectors to the appropriate terminals and close the microwave door to check that the switch engages appropriately.
This high-voltage diode is designed for use within various makes and models of microwaves and is a genuine OEM part that converts alternating current (AC) into direct current (DC). If you notice your microwave turns on and starts but does not heat anything, this diode is likely responsible. You can check the continuity of the diode with a...Read more multimeter before outright replacing it, but it is important to remember that doing any repairs on a microwave and dealing with sensitive electrical components should be done carefully and with the appropriate precautions to avoid any hazards. To replace the high-voltage diode in your microwave, disconnect it from power and allow it to discharge. Using the appropriate screwdrivers, gain access to the control panel of the microwave. Using an insulated screwdriver, release any electrical charge in the capacitor by touching it across the terminals. Then you can remove any hardware securing the diode, including the harness connecting it to the capacitor, which may be easiest done with pliers. Connect the new diode to the capacitor terminal and the securing bracket, and then reassemble your microwave before connecting it to power again.
This is a mounting bracket for a microwave. The part is fitted between your microwave and wall to allows you to secure your appliance safely to the wall studs and install it above your range. It is made entirely of metal and has holes throughout the length of the part so you can choose to put screws where the wall studs are. This ensures ...Read moreperfect installation. The bracket measures 13 inches in diameter. Be sure to have someone help you secure the microwave to the wall. This is a genuine OEM replacement part. Hardware is not included.
This is a high limit thermostat designed for use within various models of microwaves. The purpose of a high limit thermostat is to open the circuit of the appliance when the internal temperature reaches a certain threshold, to avoid becoming a safety hazard. If this thermostat fails or is damaged, it will cause your microwave to stop oper...Read moreating entirely. This is not to be confused with a thermal fuse, which is a one-time use component, whereas this high-limit thermostat resets once it drops back below operating temperatures. But if your microwave has repeatedly shut off, it is defective, or if the manufacturer recommends you replace it after it is triggered, it needs to be replaced immediately for safe operation. Consider inspecting your microwave for other component damage or factors that could lead to your microwave overheating, because that is what is causing this thermostat to be triggered. Replacing the high-limit thermostat will require a flathead and/or Philips-head screwdriver to remove the cover for the electronics of the microwave. First, you will want to unplug your microwave from the wall outlet and use your screwdriver to remove the side/top cover to give you access within it. Using your user manual, locate the thermostat within the main panel assembly and disconnect it from the wire harnesses, which may require a set of pliers. Here you can inspect it and any other components for visible burn damage. You can also test this thermostat for continuity with a multimeter, to see whether it is burnt out or perhaps defective. Install the new thermostat in place and reassemble your microwave, and you can now microwave safely.
This incandescent lamp in your microwave lights up the interior of the appliance and the cooktop if it is positioned above your stove. This allows you to easily keep an eye on your food while it cooks. It operates at 130 volts and has a power rating of 4 watts. If the bulb fails to light up or shows signs of damage like a broken filament ...Read moreor blackened appearance, it should be replaced. To remove the lamp, refer to your user manual for specific instructions. Generally, you will need a screwdriver to remove the cover or panel near the lamp and then unscrew the bulb counterclockwise to detach it from the socket. Take care when handling the lamp, using a cloth or tissue to avoid direct contact. It is important to confirm the number of lamps needed for your appliance before making a purchase since this OEM replacement part is sold individually.
This charcoal filter is used in conjunction with your microwave. This part measures to be about 9 inches wide, and 4 inches deep. The middle is charcoal colored with an outer chrome-colored boarder. The function of this piece is to prevent cooking odors and airborne particles from circulating through your microwave vent while you are cook...Read moreing. When replacing this piece, we recommend that you remove your old filter and give the area a thorough disinfecting before installing the new one.
This thermostat (part number DE47-20059B) is for microwaves. Thermostat DE47-20059B is a safety device that shuts off the microwave if it overheats. Because high-voltage capacitors in a microwave can retain a lethal electrical charge even when the microwave is unplugged, a service technician should install this part.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Grease filters were missing from the over-the-stove microwave
67 of 132 peoplefound this instruction helpful.
Lori from Salt Lake City, UT
Really Easy
Less than 15 mins
Why a tenant would remove and discard the grease filters without replacing them is beyond me! But, I removed the filters from the package and slid them into place. Two minutes tops. I would like to add that I ordered these on Thursday afternoon, and I had them on Saturday; awesome customer service!
Was this helpful?
Thank you for voting!
Microwave door did not close
46 of 70 peoplefound this instruction helpful.
Rozsa from MADISON, NJ
Easy
30 - 60 mins
Initially I called a Samsung recommended appliance repair outfit to fix the latch. The technician informed me that he does not fix latches. I need to buy a full new door for the microwave for $215 plus he charges $165 to come to my house. I got angry and did some research and it turned out that this is a very common problem. I ordered par
... Read moret PS4229162 "door key" $6.67 then followed the instructions on a youtube video by zimsjeep "Repair a Broken Microwave Door Latch" to install. At first I struggled a bit hooking up the spring to the frame, but then I used a slim plier to hold the spring (instead of my fingers) and that did the trick.
Read less
Was this helpful?
Thank you for voting!
Not the original type bulb
31 of 40 peoplefound this instruction helpful.
John from Orlando, FL
Really Easy
Less than 15 mins
Screw drivers
The repair was very easy, however the bulb was not the same as the original one. The original bulb had a bright setting and a low setting, but the replacement bulb was only the low setting bulb. There was no bright and dim operation. The switch on the microwave had the duel settings.