My Orders
40141003011 Kenmore Refrigerator - Overview
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$83.95
In Stock
Upper Door Bin
Part #DA97-06177C
This is a door shelf that is designed for use within Samsung refrigerators. This shelf measures 16.5 inches wide, 4 inches high, and 6.5 inches deep, and is made of white and clear plastic. If your current refrigerator door shelf is cracked or damaged in any way, it should be replaced immediately to continue to support whatever food items...Read more you need it to hold. Replacing this shelf is simple and only requires you to lift up on its rear hooks, and install the new one by hooking it in the refrigerator door. This shelf is a genuine OEM part that is sold individually.
Read less
$67.01
In Stock
Refrigerator Door Bin
Part #DA97-06175F
This door bin (part number DA97-06175F) is for refrigerators. Door bin DA97-06175F attaches to the inside of the refrigerator door and typically holds jars and bottles. Follow the instructions in the owner's manual for installing this part.
$7.65
In Stock
Upper Hinge Closing Cam - Left
Part #DA66-00558B
This door closer (part number DA66-00558B) is for refrigerators. Door closer DA66-00558B helps the door open and close smoothly. Wear work gloves to protect your hands when installing this part.
$6.40
In Stock
Tapping Screw
Part #6002-000213
$53.20
In Stock
Refrigerator Water Filter
Part #HAF-CU1/XAA
This genuine OEM water filter is made for your side-by-side or French door refrigerator, working to reduce impurities like iron, chlorine, and rust for better-tasting water. With a capacity of 300 gallons, it is easy to install with a rear mount design, saving space in your fridge. If the filter gets damaged or clogged, you might notice s...Read morelower water flow or odd tastes. We suggest swapping it out every six months. Sign up for our water filter subscription plan for automatic replacements.
Read less
$50.75
In Stock
$89.05
In Stock
Power Cord
Part #3903-001003
This is a power cord made for Samsung refrigerators. If your current power cord is damaged, broken, or no longer supplying power to your fridge, you can disconnect it from the wall outlet, strip it from your fridge, and replace it with this OEM cord. This power cord is sold individually and does not include any other parts or accessories.
$29.74
In Stock
Fan Blade Assembly
Part #DA31-00010D
This condenser fan blade (part number DA31-00010D) is for refrigerators. Condenser fan blade DA31-00010D moves air across the condenser coil to cool the hot refrigerant before it enters the evaporator. Safely store any food that could deteriorate while the power is off and unplug the refrigerator before installing this part.
No Longer Available
Screw
Part #6009-001526
This Samsung hex screw is a genuine OEM replacement fastener that is designed for the refrigerator door handle. It is a stainless steel screw that secures the handle to the refrigerator door. It is responsible for providing stability and support to the handle to ensure that the handle remains firmly attached and functional. Over time the ...Read moremounting screw may fail, typically due to wear and tear, accidental damage, or corrosion, and the handle may become loose or detach completely. A loose or detached handle can make it difficult to open or close the fridge door properly. Additionally, an unstable handle can cause damage to the door or handle mechanism, which can result in further costly repairs. Therefore, it is recommended to replace the mounting screw(s) promptly to ensure you can continue to use and enjoy your refrigerator. Be careful not to overtighten the screw during the repair as this can damage the handle and mounting surface. Each hex screw is sold individually.
Read less
$12.05
In Stock
$7.47
Special Order
Screw
Part #WP1163283
$47.95
In Stock
Common Symptoms of the 40141003011
How this model fails, and the parts that fix it.
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Cracked left bottom door hinge
9 of 12 people
found this instruction helpful.
Unplug refrigerator Turn off water supply to ice maker. Unscrew plastic top cover. Unplug all of the electronic connectors Ooen both doors and remove the base plate 3 screws Disconnect the 2 water lines. Have a container to catch the water. Instructions on how to disconnect are on
... Read more
a tag locates in in of the water lines Unscrew the 3 bolts holding the top door hinge and the ground wire Remove the door by lifting up . The water hoses will lift out of the broken base hinge. Remove the broken hinge by pulling straight up. It slides out. Slide the new hinge in. Remount the door by inserting the hoses through the hinge hole. 2 people is helpful. Attach the top door hinge, reconnect the water lines, base cover and Reconnect electronics wires and cover. Good to go
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Freezer door not closing properly, cam broke at bottom of door
6 of 7 people
found this instruction helpful.
Unplug the refrigerator and turn off the water supply
Remove the screws from the freezer top hinge cover and remove it
Disconnect all the plugs and the grounding screw that were present under the cover
Remove the front bottom grill (under the doors) 3 screws
Place the drip pan under the waterline connectors
On the ... Read more freezer side of the connector push the lock into the connector and pull the hoses straight out of the connector
Remove the bolts from the top freezer hinge and lift it off
Lift the whole freezer door straight up off of the bottom hinge and lay it on a flat surface.
Remove the screws from the hinge piece on the bottom of the door and slide it out.
Line the new hinge piece up and slide it into place and reinsert the screws.
Remove the cam screw from the hinge bottom (still attached to the refrigerator) and remove the can pieces
Place the new cam on the hinge bottom and reinstall the screw. The flat side of the cam goes down.
Lift the freezer door back into place by lining up the bottom hinge pieces
Slide the top hinge back into the freezer top and reinstall the bolts
Reinstall the hoses into the connectors on the refrigerator bottom by pushing them in
Plug all the connectors together on the freezer top and reinstall the grounding screw
Space out the connectors so they will fit under the cover and put the top cover back on.
Plug the refrigerator back in and turn on the water supply.
Test the water and ice maker then check the bottom connectors for leaks
Reinstall the bottom grill and congratulate yourself on a job well done
Remove the screws from the freezer top hinge cover and remove it
Disconnect all the plugs and the grounding screw that were present under the cover
Remove the front bottom grill (under the doors) 3 screws
Place the drip pan under the waterline connectors
On the ... Read more freezer side of the connector push the lock into the connector and pull the hoses straight out of the connector
Remove the bolts from the top freezer hinge and lift it off
Lift the whole freezer door straight up off of the bottom hinge and lay it on a flat surface.
Remove the screws from the hinge piece on the bottom of the door and slide it out.
Line the new hinge piece up and slide it into place and reinsert the screws.
Remove the cam screw from the hinge bottom (still attached to the refrigerator) and remove the can pieces
Place the new cam on the hinge bottom and reinstall the screw. The flat side of the cam goes down.
Lift the freezer door back into place by lining up the bottom hinge pieces
Slide the top hinge back into the freezer top and reinstall the bolts
Reinstall the hoses into the connectors on the refrigerator bottom by pushing them in
Plug all the connectors together on the freezer top and reinstall the grounding screw
Space out the connectors so they will fit under the cover and put the top cover back on.
Plug the refrigerator back in and turn on the water supply.
Test the water and ice maker then check the bottom connectors for leaks
Reinstall the bottom grill and congratulate yourself on a job well done
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Broken door shelves
0 of 1 people
found this instruction helpful.
Opened the box removed the product and opened the refridgerator door and popped shelves in place.
Other Parts Used:
Was this helpful?
Thank you for voting!