EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

400813 General Electric Dishwasher - Overview

Diagrams for 400813

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lower Rack Wheel Kit - 8 Pack – Part Number: WD35X21038
$49.50
In Stock
Lower Rack Wheel Kit - 8 Pack
★★★★★
★★★★★
(169)
Part #WD35X21038
This lower rack wheel kit includes 8 wheels and 8 axles that allow the lower dishwasher rack to slide in and out smoothly. If your dishwasher door will not close, is noisy when operating, or the dishes are not cleaning properly, you might need to replace one or more of the wheels. Each wheel and axle are made of plastic, and fit into one another so they can be clipped on to the lower dishwasher rack. Many of our customers found this repair to be quick and easy, and the only tool you should need to complete the repair is a pair of pliers.
Dishwasher Rack Slide End Cap – Part Number: WD12X10304
$22.52
In Stock
Dishwasher Rack Slide End Cap
★★★★★
★★★★★
(58)
Part #WD12X10304
The Rack Slide End Cap is a white one-inch plastic part which replaces the end cap for your dishwasher rack, preventing your rack from sliding too far. If you find the dish rack is causing the door to not close properly, it may be due to the part being worn out or damaged. All you need to complete this repair is a small flat blade screw driver. Simply pop out the cap with a smaller flat-blade screwdriver and snap the new one into place. If the rear cap needs to be replaced you will need to remove both front caps and slide the rack completely off for full access. It is important to note that this part is sold individually, and more than one may be required, depending on your repair. An inexpensive part, it can be a good idea to purchase several at a time to have on-hand when needed.
Upper Roller and Axle - Kit of 4 – Part Number: WD12X10327
$31.58
In Stock
Upper Roller and Axle - Kit of 4
★★★★★
★★★★★
(93)
Part #WD12X10327
The dishwasher roller assembly attaches to the upper dishrack. It allows the dishrack to slide out easily. If the upper rack keeps falling off the track in dishwasher, the door will not close, the door makes noises, and/or dishes are not cleaning properly, it is best to replace it for more security. A flat-blade screwdriver is the only tool needed for this installation. Slide open the upper dishwasher rack and remove the retaining tabs from both ends of the rack and slide it out. Locate the older roll assembly, remove it, and replace the rollers. Remember to put back the tabs on each side before sliding it back in. Make sure the dishwasher is turned off before starting this repair.
Lower Front Dishrack Wheel – Part Number: WD12X271
$30.53
In Stock
Lower Front Dishrack Wheel
★★★★★
★★★★★
(10)
Part #WD12X271
The lower dishrack wheel on your dishwasher allows the dishrack to roll in and out effectively. If your lower dishrack wheels are damaged, or the rack does not roll in and out, you may need to replace them. This wheel is located on the front lower rack and includes the axle. This part is sold individually. The wheel and the axle are made of white plastic. The lower front dishrack wheel is approximately 1.5 inches in diameter. To complete the repair, simply detach the damaged wheel and axle from the rack, and install the new one by snapping the axle in place.
Corner Tub Baffle - Lower Right – Part Number: WD8X227
$24.67
In Stock
Corner Tub Baffle - Lower Right
★★★★★
★★★★★
(12)
Part #WD8X227
This baffle fits the lower right hand corner of some dishwashers. It is black rubber and has a matching left hand lower corner baffle. It is recommended that you replace and install both left and right at the same time. It will become evident that this part needs to be replaced if you are experiencing leaking or lack of draining. This is a very easy repair that requires no tools. Open the dishwasher door and simply use your hands to remove the baffle found in the lower right hand side of the dishwasher. Clean out any dirt and insert your new one into place.
Corner Tub Baffle - Lower Left – Part Number: WD8X228
$24.67
In Stock
Corner Tub Baffle - Lower Left
★★★★★
★★★★★
(21)
Part #WD8X228
The corner tub baffle may also be known as the door baffle and is a part used on your dishwasher. The left and right side baffle on your dishwasher should be installed and replaced at the same time. This specific part is for the lower left side of your appliance, the right-side is sold separately. The function of the tub corner baffle is to prevent water from leaking through your dishwasher door. The function of this specific one is to stop water from leaking through the bottom left hand side of your dishwasher door. You will not need any tools to make this installation.
Silverware Basket (Grey) – Part Number: WD28X265
$79.80
In Stock
Silverware Basket (Grey)
★★★★★
★★★★★
(34)
Part #WD28X265
The silverware basket, used for dishwashers, is in the bottom of the dishrack. The basket is used to hold eating utensils such as spoons, forks, and knives. If the basket is worn out or broken, you should replace it with this part. No tools are required as it is an easy replacement. If you need further guidance refer to the instructions provided by the manufacturer. For safety precautions make sure to unplug the dishwasher and wear gloves.
LOWER RACK – Part Number: WD28X31819
$144.57
In Stock
LOWER RACK
★★★★★
★★★★★
(80)
Part #WD28X31819
This part includes the wheels.
Piston and Nut Assembly – Part Number: WD24X10018
$32.63
In Stock
Piston and Nut Assembly
★★★★★
★★★★★
(19)
Part #WD24X10018
This is used for the check valve.
Door Gasket - White – Part Number: WD08X10057
$79.71
On Order
Door Gasket - White
★★★★★
★★★★★
(21)
Part #WD08X10057
This one piece dishwasher door gasket provides a water tight seal to keep water from leaking out of your dishwasher.
Gasket Insert – Part Number: WD08X10015
No Longer Available
Gasket Insert
★★★★★
★★★★★
(15)
Part #WD08X10015
The gasket insert is connected to the gasket in the bottom of your dishwasher door. It is a small piece of white plastic that measures approximately 4 inches by 1 inch, and is sold individually. The gasket insert helps the gasket create a seal on the door, so water doesn’t leak out when the dishwasher is running. If your dishwasher is leaking, check to see if the gasket insert is damaged. If the insert is damaged, you will need to replace it. The problem may be with the gasket itself, in which case you may need to replace that part as well.
Water Inlet Valve – Part Number: WD15X10003
$78.26
In Stock
Water Inlet Valve
★★★★★
★★★★★
(16)
Part #WD15X10003
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed. This valve has a 3/8" inlet and comes with the mounting bracket.

Common Symptoms of the 400813

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The rollers on the upper rack broke
545 of 576 people found this instruction helpful.
  • Carl from Fairfield, TX
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
There are eight guides that hold the rack rails in place. Use a Phillips screwdriver to remove the top two guides on each side in order to remove the rack from the dishwasher. The plastic axles on the rack and the rollers snap on. Use the hammer and punch to bend the metal clip on one end of the rail. Remove the plastic end piece the n slide the rollers out. Place two new rollers in the rail and put the plastic end piece on. Use the hammer and punch to bend the metal clip back into place. Snap the rails on the rack and set the rack on the guides in the dishwasher. Replace the top guide using the screwdriver, you will have to twist the rails in order get them in between the
guides.
Was this helpful?
Thank you for voting!
Lower rack wheel was melted
523 of 550 people found this instruction helpful.
  • Mark from Huntingdon Valley, PA
  • Really Easy
  • Less than 15 mins
Unsnapped clip,and moved it 90 degrees. Slip wheel and clip off. Installed clip on new wheel. replaced new wheel. The wheel did not come with a new clip and was not suggested on the parts list. The existing clip was still OK but if it was not, I would have had to order a clip and wait. All in all, a good experience.
Was this helpful?
Thank you for voting!
Wheel broken off bottom rack
503 of 520 people found this instruction helpful.
  • Julie from Maumee, OH
  • Really Easy
  • Less than 15 mins
Open the tiny plastic package in inserted the wheel onto the "axle". Opened the dishwasher, pulled out the bottom rack and snapped the wheel onto the rack. Done!
Was this helpful?
Thank you for voting!