3U24MS2VHB Haier Air Conditioner - Overview
Sections of the 3U24MS2VHB
[Viewing 1 of 1]Keep searches simple, eg. "belt" or "pump".
Questions And Answers for 3U24MS2VHB
Ask our experts a question about this model and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ted
January 17, 2020
No heat unless all 3 indoor units call for heat
For model number 3U24MS2VHB
Hello and thank you for writing.
You might have a faulty "draft inducer," this little motor exists to help clear the heat exchanger of leftover gas from a prior cycle and vent all gases produced during the furnace's combustion process.
If the inducer motor starts pulling high amps, it can eventually burn out. It can also get dirty over time, which causes safety switches to cut the furnace off. During tune-ups, you should check the draft to make sure the inducer fan motor is working properly. We hope this helps. Please contact us anytime if you require further assistance.
Did this question help you?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.