EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3A - Overview

Models starting with 3A

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lawn Mower Rear Skirt – Part Number: 532413160
$17.55
In Stock
Lawn Mower Rear Skirt
★★★★★
★★★★★
(1)
Part #532413160
This genuine manufacturer sourced replacement part is designed for use with lawn mowers.It attached to the mower deck to protect your feet and legs from grass clippings and debris. It is made out of plastic and it is sold individually. Please note the brackets and hardware are sold separately.
Tiller Jamlock Nut – Part Number: 712-0266A
$6.40
In Stock
Tiller Jamlock Nut
Part #712-0266A
The Jamlock Nut is a 3/8-16 inch metal nut which can be installed using a socket or wrench set. It's used to secure and lock parts in place. If the part is damaged and comes loose it should be replaced. This is an authentic part authorized by the manufacturer.
Blade Adapter – Part Number: 581547901
$26.35
In Stock
Blade Adapter
★★★★★
★★★★★
(3)
Part #581547901
This is an OEM replacement part for various models of lawn mowers. This part connects the blade to the shaft, is made of metal, is silver, is not part of a kit or assembly, and is sold individually. It will be found on the shaft of the mower, where the blade attaches. If your blade can no longer be supported and held on the machine, you should inspect the Blade Adapter for signs of wear or damage, replacing it if you find any. You will need a socket set and wrench set to complete this repair. Customers rate this repair as Easy.
Lawn Mower Flangelock Hex Nut – Part Number: 532409149
$6.72
In Stock
Lawn Mower Flangelock Hex Nut
Part #532409149
Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To replace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.
Plate, Mulcher – Part Number: 532160830
No Longer Available
Plate, Mulcher
Part #532160830
This is a genuine replacement part designed for use on lawn mowers. It is mounted to the side of the mower and it acts as a door to keep the grass under the deck. This makes your grass clippings better as mulch since the smaller clippings will decompose more quickly, releasing their nutrients into the soil. Please note a bracket and other hardware used to attach this mulch door are sold separately. This part is made out of black plastic and it is sold individually.
Engine Zone Control Cable – Part Number: 532130861
No Longer Available
Engine Zone Control Cable
★★★★★
★★★★★
(1)
Part #532130861
This authentic OEM sourced replacement part that is specially manufactured for use on walk-behind lawn mowers. This cable assembly consists of a durable metal cable with rubber insulation. The purpose of this cable is to stop the blade when the control handle is released on mowers. If the cable is broken it will cause the brake to not release even when the lever is pressed. Please note this replacement engine zone control cable is sold individually.
Fuel Line Clamp – Part Number: 26460
No Longer Available
Fuel Line Clamp
Part #26460
The Fuel Line Clamp is a metal, individually sold part which clamps onto the fuel line, securing it to a port and preventing leaks. Installation is rated as "Easy" by customers and will require pliers and a screwdriver. If broken due to wear/fatigue/damage, there may be a fuel leak and the part should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.
Lawn Mower Hardened Washer – Part Number: 532851074
$6.72
In Stock
Lawn Mower Hardened Washer
Part #532851074
This washer is not part of a kit or assembly. It is sold individually. With an O.D. of 1 inch, this OEM replacement part is made of dark grey metal and is used to provide a tight seal between the mower blade and the blade bolt/screw. This part should be replaced if you notice any visible wear, warping, or damage. You will need a wrench or socket set to complete this repair. Customers rate this repair as Easy.
Hex Head Screw 3/8-24x1-3/8 Gr. 8 – Part Number: 532851084
$6.72
In Stock
Hex Head Screw 3/8-24x1-3/8 Gr. 8
Part #532851084
This is a genuine manufacturer-sourced replacement screw which is specially designed for use with Craftsman lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and use of this item. This part is made of high-quality metal and it is sold individually, you will need a wrench to secure or remove it.
Screw – Part Number: 650820
$6.30
In Stock
Screw
Part #650820
Control Bar – Part Number: 532086902
No Longer Available
Control Bar
Part #532086902
This is an original part from Craftsman for use with Lawn Mowers. The bail control bar lets you start the engine when you pull the bail control bar against the handle and kills the engine when you release it. The most common reason for replacing the bail arm is if it is damaged. This part is sold individually. There are no tools needed to replace the bail control bar.
Screw, T-30 Hex Washer Hd Sems – Part Number: 30063
$6.40
In Stock
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
My lawn mower blade wouldn’t stay in place. The old blade adapter had worn down and broken.
3 of 19 people found this instruction helpful.
  • Joel from ROSEVILLE, MN
  • Very Easy
  • Less than 15 mins
  • Socket set
I took off the old blade adapter and put the new one on. It literally requires removing one bolt. Unfortunately, once I started and ran my mower for a few minutes it blew up and left a charred patch of lawn. The underside of the mower is mangled metal and unusable now. The repair, though, was super easy!
Was this helpful?
Thank you for voting!