395SSR (012036701) Ryobi Trimmer - Overview

This OEM fuel line and filter supply fuel from the tank of your engine to its carburetor. Made of clear plastic and sold individually, the fuel line may end up clogged or cracked, causing fuel to leak as a result of general wear and tear. The filter may also end up damaged or clogged over time, and shold be replaced regularly as a part ...Read moreof proper engine maintenance. Luckily, this is an easy repair that requires no tools to carry out.

This manufacturer-certified primer and hose assembly includes the primer bulb, the primer bulb housing, and the fuel line. Any or all of the clear plastic parts in this assembly may experience wear and tear over time that cause fuel to leak due to cracking or blockages. If they are not functioning, these parts will fail in their functio...Read moren of supplying fuel from the tank to the carburetor. This is an easy repair, which can be made by identifying the location of the parts, between the fuel tank and the carburetor, and reinstalling them with no special tools required. When installing, make sure the fuel lines are tight to prevent leaks and fire hazards.

This Spark Plug is inserted into the cylinder head and is rated as "Easy" to install. The spark plug ignites the air fuel mixture inside the combustion chamber. If the part doesn't work, or is missing then the engine will not start and the spark plug must be replaced. This part should also be replaced annually as a part of proper engine maintenance. Tip: Gap to manufacturer's specs before installing.

This is an original part from Craftsman for use with Trimmers and Cultivators. The carburetor mount gasket seals the space between the carburetor mount and the engine. The most common reasons for replacing the carburetor mount gasket is if there is oil leaking from the crankcase, the crankcase gasket is missing or damaged or any time the ...Read morecrankcase cover is removed. This part is sold individually. The tools that you will need to replace the carburetor mount gasket is a receptacle for draining fuel, Phillip's / Torx drivers, long-nosed pliers and a razor blade.

This is an authentic part which is sourced from original equipment manufacturer. It is generally used on handheld trimmers/edgers. This nut is designed to secure cutting blade to the trimmer shaft. Please note you would need a properly sized wrench when installing/removing this nut. Includes one (1) nut per order.

The spring fits between the outer spool & eyelet assembly and the inner reel. It is a genuine item that is supplied by the original equipment manufacturer for use with trimmers made by Ryobi, Troy-Bilt, Bolens, Yard Man, MTD, and Cub Cadet. A screwdriver might be necessary when replacing this part if it becomes broken or bent. This part is made out of metal and is available individually.

The inner reel goes between the bump head knob and the outer spool & eyelet. It is made of plastic and is sold individually. The reel is a genuine replacement part for trimmers made by MTD, Ryobi, Troy-Bilt, Bolens, Yard Man, and Cub Cadet. This part may become broken and will need to be replaced. A screwdriver might be required when replacing this part.

It is a genuine replacement part which is supplied directly from the original equipment manufacturer for use with handheld lawn and garden equipment. The purpose of this special cap is to keep the fuel in the tank, this part provides an identical replacement for a missing or damaged component which came with the new unit. It is a high-quality part which is made of durable plastic material and is sold individually.

This is an original replacement part manufactured for use with trimmers. The metal blade assembly attaches to the trimmer guard with two nuts and bolts, the hardware will come with the blade assembly. The blade assembly is used to trim excess line, the blade assembly is sold individually.

The Screws are sold separately.

This is a genuine Ryobi, Troy-Bilt, Bolens, and MTD replacement part for use in blowers and trimmers. The bump head attaches to the drive shaft. A strap wrench may be needed during the replacement of this part. It is made out of durable materials and will need to be replaced if it breaks. This item is sold individually.

It is a genuine manufacturer-sourced replacement part that is supplied for use with handheld trimmers and tillers. This is the special clamp assembly which is used to secure the gearbox assembly to the outer boom housing. It is a high-quality component which is made of durable metal and it is sold individually.