Genuine Bissell replacement belts used on Vacuums. This is the Pack of Two (2) belts. Belts tend to stretch over time, so it is recommended to change them at least every 6 months for optimum performance.
This part comes directly from Bissell. The Crevice Tool is used with many models of Bissell vacuums. The Crevice Tool is made of a dense plastic and is used to vacuum out all the hard to reach places where space is limited. This tool is great for corners, folds, and cracks. No tools are needed to attach this tool to the hose. This part sh...Read moreould be replaced if the tip becomes cracked or there is a clog that can't be removed.
This is an authentic Bissell prefilter that is specially designed for upright vacuums. It is supplied directly from original equipment manufacturer. The purpose of this foam filter is to provide an extra layer of air filtration before it goes into the motor. Please note, the filter tray is sold separately. One filter is included per order. Replacing this filter is extremely easy and it does not require any tools.
This is an authentic Bissell replacement part manufactured for use with upright vacuums. The special light bulb is used at the top of the brush roll assembly and is used to illuminate the area just in front of the vacuum. This light bulb is available as an individual replacement part, please see model diagram for associative parts.
This authentic OEM sourced replacement brushroll is designed to fit Bissell upright vacuums. The spinning motion of this brush helps to pick up dust and debris. This 14" roller is made out of plastic and it is sold individually. To complete this repair you would need a screwdriver. • Remove screws from the access plate • Remove plate and replace the brushroll • Re-assemble and test the unit
This part is an OEM direct from Bissell and is specifically designed to be used with various models of upright vacuums. This part is used to secure the cord in place and is also used to rest the hose on. This part which is made of a high quality durable plastic is sold as an individual replacement part.
This is an authentic Bissell replacement part manufactured for use with upright vacuums. The lever release is used to release the vacuum's upright to allow the base to pivot. This lever is available as an individual replacement part, please see model diagram for associative parts.
The inner cyclone attaches to the upper louvers and is made of plastic. Keep in mind that this part is sold individually. This item is an original part from Bissell for use in vacuums. You may need a screwdriver when replacing this item. It might break over time and will need replacing.
This replacement HEPA filter is specially manufactured for Bissell upright vacuums. It is a genuine OEM part, not an aftermarket equivalent. It is the dry filter that will help to remove dust and other contaminants from the air entering the vacuum. This filter is made out of pleated paper in a plastic frame and it is sold individually. R...Read moreeplacing this filter is a simple task that does not require any tools. • Unplug the vacuum • Open the filter cover • Remove the old filter • Secure the new filter in place • Close the cover
This is an authentic Bissell replacement part that is sourced from the original manufacturer for use with carpet cleaners and upright vacuums. The power switch is used to relay electricity from the cord to the electric motor. This switch is available as an individual replacement part.