39038 MTD Tiller - Overview

This is an authentic MTD tiller replacement part. The hex B-tap screw is used to fasten the cable barrel holder to the clutch lever to ensure good tension on the clutch cable. The part is made of durable metal. You will need a wrench to replace this piece. This item is sold individually.

This T-knob, is a manufacturer-approved replacement part for use in tillers and lawn tractors. It is a T-shaped handle used in a variety of applications, such as adjusting the equipment RPMs (revolutions per minute) or it can be attached to the depth bar and used to control the depth that the tines or blades penetrate the soil, for tasks ...Read moresuch as tilling soil or cutting grass. However, if the threads on the bolt wear out or the plastic body of the knob becomes damaged, you will not be able to control your equipment using the knob. A faulty T-knob may result in inconsistent speed, inaccurate depth settings, uneven tilling, or inefficient grass cutting. Remove the fasteners that secure the t-knob and pull it off the equipment. It is recommended to replace the fasteners at the same, especially if they are worn down or damaged. Place the new T-knob in position and secure it with the fasteners

It is a genuine item that is sourced directly from the original equipment manufacturer for use with lawn and garden equipment. This is a standard hardware which may have multiple applications depending on the model of your unit, please make sure to check the appropriate diagrams for the correct location and use of this hex jam nut. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is an authentic replacement part manufactured for use with outdoor power equipment. The snap ring is used with different models of equipment and is used with various part assemblies depending on the model of equipment. This snap ring is available as an individual replacement part, please see model diagram for part location and usage.

This OEM Hex Nut 5/16-24 is a silver, metal nut. This certified part is sold individually. It can be applied with a Wrench or Socket and Torque Wrench to the bracket on the rear of the auger house to secure a bracket to the back of the auger housing. Simply torque to the manufacturer specifications. Refer to your owners manual to find o...Read moreut if this is the part you need. Over time the part may be damaged by fatigue and will come loose due to damaged threads, at which time it should be replaced.