EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

38752 Toro Snow Blower - Overview

Models starting with 38752

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Washer – Part Number: 107-3844
$6.55
In Stock
Washer
Part #107-3844
A washer is used for things such as load distribution, stability, alignment and protection for whatever equipment it is fastened between. This curved washer, also known as a wave washer or spring washer, is made of metal and features a curved design that allows for applications in settings where objects being fastened together are also curved or to exert a continuous level of tension. This washer measures approximately 1-inch in outer diameter and 1/3-inch inner-diameter and is compatible with and used on equipment like snowblowers, chainsaws and lawnmowers. This washer is installed between a round fastener or knob to better secure them together and if you notice that where the washer is normally connected is loose or vibrates excessively, this washer likely needs replacing. Depending on your model the replacement process may appear different, but it is just as simple as placing the washer between two things that are connected and securing them tightly.
Screw-hwh – Part Number: 46-8091
$6.55
In Stock
Screw-hwh
Part #46-8091
This screw is an OEM part sourced directly from the manufacturer and is used in Toro snowthrowers. It requires a wrench and connects the ring-chute to the chute-discharge. The screw is made of metal and is sold as an individual part. Screws will need to be replaced when they become stripped.
Nut-lock, Ni – Part Number: 3296-29
$6.55
In Stock
Nut-lock, Ni
Part #3296-29
The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.
Nut-lock, Ni – Part Number: 3296-56
$6.55
In Stock
Nut-lock, Ni
Part #3296-56
This is a Manufacturer Approved replacement nut for lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.
Bearing-ball – Part Number: 38-7820
$21.48
In Stock
Bearing-ball
Part #38-7820
This metal ball bearing reduces friction and evenly distributes weight among the rotating parts in your lawn equipment. These bearings can be found in various areas such as the wheels, in pulleys, blades or augers. When the bearing is damaged, you may notice a few things. Your machine may produce rough or grinding noises and excessively play or wobble. The affected part may also become stuck. Immediate replacement is necessary to prevent increased friction, inefficient performance, and potential equipment failure. Removing the bearing depends on your model, so consult your user manual for guidance. You will need to use a screwdriver or pliers to remove the surrounding components around the bearing and a bearing puller, pry bar, or mallet to release the bearing itself from its housing. As ball bearings wear out together, it is advisable to replace all of them at once. Ensure you verify the number of bearings your machine needs before purchasing this OEM replacement part as it is sold individually.
Screw-hwh – Part Number: 32144-4
$6.55
In Stock
Screw-hwh
Part #32144-4
This screw is an authentic OEM sourced hardware, it is not an aftermarket imitation. It is commonly utilized on Toro snow throwers. It is a standard hardware which has multiple uses depending on your unit, please make sure to check appropriate diagrams for correct location and use of this hardware. One hex head screw is included per order.
Screw – Part Number: 84-1971
No Longer Available
Screw
Part #84-1971
Lawn Mower Hex Head Screw – Part Number: 321-4
$6.40
In Stock
Lawn Mower Hex Head Screw
Part #321-4
This 1/4-20 x 3/4-inch hex-head screw secures parts on compatible outdoor power equipment. It is made from Grade 5 steel and has a yellow zinc finish for added rust resistance. Check the equipment model and parts diagram before ordering.
Spacer-blade, Rotor – Part Number: 55-9370
$6.55
In Stock
Spacer-blade, Rotor
Part #55-9370
It is an authentic OEM component which is made for Toro snowthrowers. This special spacer ensures a tight fit helping to secure the blade-rotor. It provides a high-quality replacement for a missing or a damaged hardware that was installed on a new unit. Check the diagrams of your specific model for the exact location of this component. It is made of durable metal and is sold as an individual item. Replacing it is a simple task that may only require a wrench set. Simply screw that holds the blade-rotor and replace the old spacer with the new.
Spark Plug – Part Number: 81-3250
$11.72
In Stock
Spark Plug
Part #81-3250
This is a genuine OEM sourced replacement part that is specially made for Toro lawn and garden equipment. A spark plug delivers electric current from an ignition system to an internal combustion engine. Over time spark plugs may become dirty or fouled eventually requiring replacement to maintain peak performance. You should gap your spark plug according to the owners manual of the outdoor product you have. Please note this high quality item is sold individually.
Nut-lock, Ni – Part Number: 3296-47
$6.55
In Stock
Nut-lock, Ni
Part #3296-47
This is an authentic replacement part manufactured for use with Toro snowthrowers. The ni lock nut is designed to prevent from being unthreaded from vibration. This nut is used with several different models of snowthrowers and is used with various applications. The nut is sold as an individual replacement part, please see model diagram for associative parts.
Nut-lock, Ni – Part Number: 3296-39
$6.55
In Stock
Nut-lock, Ni
Part #3296-39
This replacement hardware is sourced from original equipment manufacturer for use with Toro snowthrowers. It is standard hardware which has multiple applications, please refer to appropriate diagrams for correct location and use of this locknut. This part is made from durable metal and it is sold individually.

Exact Part matches for your search term

3/8-inch-16 X 2-1/2-inch Socket Head Capscrew – Part Number: 38752
No Longer Available
3/8-inch-16 X 2-1/2-inch Socket Head Capscrew
This part number matches the current model number 38752
Part #38752
Ball bearing – Part Number: 38752
No Longer Available
Ball bearing
This part number matches the current model number 38752
Part #38752