This manufacturer-certified Primer Bulb is a black rubber part which comes individually sold. It is used to pump fuel from the fuel tank to the carburetor to start the engine. Installation is rated as "Easy" by customers, and will require a screwdriver and pliers. The part attaches to the primer assembly. If the bulb breaks due to wear/fa...Read moretigue/damage you will see fuel leaking, and the part should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.
This ignition key is used in lawn equipment to start and stop its engine. Inserting the key into the ignition switch activates the starter motor. Thus, it is a safety device which prevents accidental or unauthorized use of the equipment. A broken key might be loose or hard to turn. In some cases, it might have completely fallen out of the...Read more switch. Without the ignition key, it will be difficult or impossible to start the engine. Locate your ignition key by reading your user manual. To remove a stuck ignition key, you may need to use a small amount of lubricant on it. While turning the key in the ignition switch, gently wriggle it back and forth. There may also be a release button that you could press, depending on your model type. This replacement part is an OEM product and is sold per unit.
This is an authentic manufacturer sourced replacement part designed for use with Toro snow throwers/blowers. This part helps to secure the primer bulb and connect the fuel hose. It is made out of plastic and it is sold individually.
This metal ball bearing reduces friction and evenly distributes weight among the rotating parts in your lawn equipment. These bearings can be found in various areas such as the wheels, in pulleys, blades or augers. When the bearing is damaged, you may notice a few things. Your machine may produce rough or grinding noises and excessively p...Read morelay or wobble. The affected part may also become stuck. Immediate replacement is necessary to prevent increased friction, inefficient performance, and potential equipment failure. Removing the bearing depends on your model, so consult your user manual for guidance. You will need to use a screwdriver or pliers to remove the surrounding components around the bearing and a bearing puller, pry bar, or mallet to release the bearing itself from its housing. As ball bearings wear out together, it is advisable to replace all of them at once. Ensure you verify the number of bearings your machine needs before purchasing this OEM replacement part as it is sold individually.
This screw is an authentic OEM sourced hardware, it is not an aftermarket imitation. It is commonly utilized on Toro snow throwers. It is a standard hardware which has multiple uses depending on your unit, please make sure to check appropriate diagrams for correct location and use of this hardware. One hex head screw is included per order.
It is an authentic OEM component which is made for Toro snowthrowers. This special spacer ensures a tight fit helping to secure the blade-rotor. It provides a high-quality replacement for a missing or a damaged hardware that was installed on a new unit. Check the diagrams of your specific model for the exact location of this component. It...Read more is made of durable metal and is sold as an individual item. Replacing it is a simple task that may only require a wrench set. Simply screw that holds the blade-rotor and replace the old spacer with the new.
This is a genuine OEM sourced replacement part that is specially made for Toro lawn and garden equipment. A spark plug delivers electric current from an ignition system to an internal combustion engine. Over time spark plugs may become dirty or fouled eventually requiring replacement to maintain peak performance. You should gap your spark...Read more plug according to the owners manual of the outdoor product you have. Please note this high quality item is sold individually.
This is an authentic replacement ignition switch. It is sourced from original manufacturer and it is specially designed for use on Toro snow throwers/blowers. It allows user to start their equipment using a simple ignition turn key (sold separately). This switch has a plastic body and two metal wire terminals/prongs. Includes one (1) swit...Read morech per order. Replacing this switch is a simple task that generally does not require any tools. • Reach under cover/housing and disconnect cord from the old switch • Pull out switch • Secure new switch in place • Reconnect power cord and test the unit
It is a genuine OEM sourced replacement screw which is specially designed for use with Toro snowblowers. This hardware has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams of your model for the correct location and use of this item. It is a high-quality component which is made of du...Read morerable metal and it is sold individually, you will need a Phillips screwdriver to install or remove it.
This is one of the half-rotors that are utilized to secure rotor blades to the rotor shaft. It is an authentic item that is supplied by original equipment manufacturer for use with Toro and Lawn Boy snowthrowers. Over time it may wear out, get damaged or lost eventually requiring a replacement. Check the diagrams and the owner's manual fo...Read morer your model to ensure the proper repair procedure. This high-quality half-rotor is made of durable metal and is sold as an individual item.