EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

38518 - Overview

Models starting with 38518

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Nut-lock, Ni – Part Number: 3296-42
$6.55
In Stock
Nut-lock, Ni
Part #3296-42
This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place, on the impeller assembly. These nuts are a one-time use part due to their locking mechanism. You'll know the nut has broken when it appears to have damaged threads or rounded off edges. Customers found this to be an easy repair.
Primer Bulb – Part Number: 66-7460
$9.32
In Stock
Primer Bulb
★★★★★
★★★★★
(1)
Part #66-7460
This manufacturer-certified Primer Bulb is a black rubber part which comes individually sold. It is used to pump fuel from the fuel tank to the carburetor to start the engine. Installation is rated as "Easy" by customers, and will require a screwdriver and pliers. The part attaches to the primer assembly. If the bulb breaks due to wear/fatigue/damage you will see fuel leaking, and the part should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.
Lawn Mower Hex Head Washer Screw – Part Number: 2828635SM
$7.08
In Stock
Lawn Mower Hex Head Washer Screw
Part #2828635SM
This is a genuine Murray replacement part, it is sold individually. It is commonly used in lawn tractors, and is used in various places in the compatible models listed below. It is self tapping, with a 9/16 hex head. Made of metal.
Gasket-exhaust – Part Number: 692236
$6.47
In Stock
Gasket-exhaust
Part #692236
This OEM exhaust gasket in lawn and garden equipment creates a seal between the engine block and the muffler or exhaust pipe so that exhaust gases do not leak. This is 3.30cm in diameter and 6.35cm in length. Your machine may have a loud hissing or popping sound coming from the exhaust area if the gasket was faulty. You may also notice the presence of black soot around the gasket or the exhaust. Your gasket needs to be replaced if it appears worn or deformed. Otherwise, your machine will experience exhaust leaks. To detach the gasket, remove the fasteners that secure it using a socket or wrench. You can detach the gasket from your machine afterwards. Please bear in mind that this replacement part is sold individually.
Lawn Mower Cotter Pin – Part Number: 703312
$6.40
In Stock
Lawn Mower Cotter Pin
Part #703312
This cotter pin is an OEM part that is 1.25 inches long, gold in color, and sold individually. Made of metal, it can have a range of applications on a variety of lawn and garden equipment. Generally, you will need to replace this part if it becomes broken due to age and wear, or if you need to remove it for making other repairs. This is an easy repair that only requires a pair of pliers to carry out. You need to bend one end around the shaft or bolt and bend the other around the back end of the bolt to complete the repair.
Washer – Part Number: 107-3844
$6.55
In Stock
Washer
Part #107-3844
A washer is used for things such as load distribution, stability, alignment and protection for whatever equipment it is fastened between. This curved washer, also known as a wave washer or spring washer, is made of metal and features a curved design that allows for applications in settings where objects being fastened together are also curved or to exert a continuous level of tension. This washer measures approximately 1-inch in outer diameter and 1/3-inch inner-diameter and is compatible with and used on equipment like snowblowers, chainsaws and lawnmowers. This washer is installed between a round fastener or knob to better secure them together and if you notice that where the washer is normally connected is loose or vibrates excessively, this washer likely needs replacing. Depending on your model the replacement process may appear different, but it is just as simple as placing the washer between two things that are connected and securing them tightly.
Knob-handle – Part Number: 106-4161
$7.32
In Stock
Knob-handle
Part #106-4161
Genuine OEM replacement part used on Walk Behind Mowers and Snowblowers. This is a Plastic Knob with a Metal Bushing inside. Does not ship with screw or washer these parts are sold separately. Replacing this part is very easy and it does not require any additional tools.
Lawn Mower Solenoid – Part Number: 7701100MA
$31.85
In Stock
Lawn Mower Solenoid
Part #7701100MA
Starter solenoid
Adapter- Blade – Part Number: 92466MA
$14.97
In Stock
Adapter- Blade
Part #92466MA
The Blade Adapter is used to connect the mower blade to the base of the mower deck. The part is individually sold, silver metal, and measures approximately 2 inches in diameter. Installation requires a Wrench or Socket and is rated as "Easy". If damaged (likely due to fatigue and general wear) there maay be a vibration or rattling sound from it coming loose. Refer to your make, model and diagrams to ensure this is the correct part.
Screw-hwh – Part Number: 46-8091
$6.55
In Stock
Screw-hwh
Part #46-8091
This screw is an OEM part sourced directly from the manufacturer and is used in Toro snowthrowers. It requires a wrench and connects the ring-chute to the chute-discharge. The screw is made of metal and is sold as an individual part. Screws will need to be replaced when they become stripped.
Pulley – Part Number: 690409MA
$28.99
In Stock
Pulley
★★★★★
★★★★★
(2)
Part #690409MA
This is a genuine manufacturer approved replacement ground drive idler pulley designed for lawn tractors. The purpose of this pulley is to apply tension to the belt. It is made out of plastic with metal and it is sold individually.
Nut-lock, Ni – Part Number: 3296-29
$6.55
In Stock
Nut-lock, Ni
Part #3296-29
The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.

Exact Part matches for your search term

N/L/A 02/04/01 – Part Number: 038518
No Longer Available
N/L/A 02/04/01
This part number matches the current model number 38518
Part #038518
PARTS CATALOG, (JDF4-UC) – Part Number: 38518
$14.04
Special Order
PARTS CATALOG, (JDF4-UC)
This part number matches the current model number 38518
Part #38518

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Grandson lost the ignition key to my Toro!
15 of 38 people found this instruction helpful.
  • Michelle from AYLETT, VA
  • Really Easy
  • Less than 15 mins
No repair, lol! Just a perfect fit for my ignition :). I bought two in case my grandson gets curious again.
Was this helpful?
Thank you for voting!