385048X151 ((7800319)(2008)) Murray Lawn Tractor - Overview
Sections of the 385048X151
[Viewing 8 of 8]
Keep searches simple, eg. "belt" or "pump".
Lawn Mower Hex Head Washer Screw
PartSelect #: PS8943581
Manufacturer #: 2828635SM
This is a genuine Murray replacement part, it is sold individually. It is commonly used in lawn tractors, and is used in various places in the compatible models listed below. It is self tapping, with ...
$7.08
In Stock
Lawn Mower Wing Knob
PartSelect #: PS9999469
Manufacturer #: 703065
This 5/16-18 wing knob is sold individually. It is a plastic part, black in color, that works on a variety of equipment. Its general function is to allow you to quickly loosen, remove, or fold down th...
$10.75
In Stock
Gasket-exhaust
PartSelect #: PS9294808
Manufacturer #: 692236
This OEM exhaust gasket in lawn and garden equipment creates a seal between the engine block and the muffler or exhaust pipe so that exhaust gases do not leak. This is 3.30cm in diameter and 6.35cm in...
$6.47
In Stock
Lawn Mower Solenoid
PartSelect #: PS9122216
Manufacturer #: 7701100MA
We understand how important a fully functioning dishwasher is for you, and we're here to help when there's a problem. We have the 2 Deter2nt Module that your dishwasher needs to work efficiently. Th...
$31.85
In Stock
Belt-v-motion Drive
PartSelect #: PS11831566
Manufacturer #: 37X87MA
Genuine Murray replacement part, this item is sold individually. This is the belt that transmits power from the engine to the transmission giving the Tractor motion. It is put on the large pulley that...
$32.82
In Stock
Jackshaft Hsng Assembly
PartSelect #: PS9254869
Manufacturer #: 1001200MA
The Mandrell Assembly, or Jackshaft Housing Assembly includes the housing, shaft assembly, bearing, and nut. It will require a screw driver, pliers, socket set and wrench set to install, and its insta...
$90.00
In Stock
Lawn Mower Nut
PartSelect #: PS9999668
Manufacturer #: 703409
This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard siz...
$8.19
In Stock
Nut
PartSelect #: PS8872769
Manufacturer #: 15X100MA
The Blade Nut is a 9/16-18" silver, metal nut. This part is sold individually, and requires a wrench and socket to install. Its installation is rated "Easy". This part secures the blade in place and a...
$6.40
In Stock
Belt Guide
PartSelect #: PS10005209
Manufacturer #: 7300859BMYP
This is a genuine replacement part that is sourced directly from the original equipment manufacturer for use with Murray riding lawn mowers and garden tractors. It is the part that the is secured to t...
$44.58
In Stock
Lawn Mower Seat Sensor Switch
PartSelect #: PS9072110
Manufacturer #: 7023354YP
This replacement switch is a genuine OEM part, not an aftermarket equivalent. It is supplied directly from original equipment manufacturer for Murray riding lawn mowers and tractors. This switch is se...
$18.68
In Stock
Adapter - Blade
PartSelect #: PS9072427
Manufacturer #: 690411MA
This is an Original Manufacturer Sourced replacement part used on a variety of Lawn Tractors. This part is made out of Metal and it is Sold Individually. The purpose of this is to provide a Tight Seal...
No Longer Available
Washer - Flat
PartSelect #: PS8904164
Manufacturer #: 17X195MA
This replacement washer is a genuine OEM sourced part. It is commonly used on a variety of Murray riding lawn mowers and tractors. Washers helps to distribute the pressure evenly between two connected...
$7.08
In Stock
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Hit a root with the mower blade which broke the shaft housing.
Remove old blade and blade adapter (important part).Removed nut that holds pulley to the shaft housing, then removed the pulley and put belt out of the way.Used 3/8 air impact to remove bolts that held housing in. Pre-greased th inner housing before installing.New housing mount holes were not threaded so had to get new bolts to fasten. Us
... Read more
ed 5/16 x 1-1/2" hex heads with lock washers, washers, and Teflon lock nuts. Once mounted, reinstalled the top pulley and belt, tightened top nut, and put on blade adapter at underside of housing. Now ready for new blade.
Read less
Parts Used:
-
David from HELENA, AL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set, Wrench (Adjustable), Wrench set
8 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!