385002X98A Lawn Tractor - Overview

This is a genuine Murray replacement part, it is sold individually. It is commonly used in lawn tractors, and is used in various places in the compatible models listed below. It is self tapping, with a 9/16 hex head. Made of metal.

This 5/16-18 wing knob is sold individually. It is a plastic part, black in color, that works on a variety of equipment. Its general function is to allow you to quickly loosen, remove, or fold down things such as handles. If it no longer loosens or tightens, it may be broken or damaged due to fatigue and wear. Replacing this part is an easy repair that does not require any tools.

This OEM exhaust gasket in lawn and garden equipment creates a seal between the engine block and the muffler or exhaust pipe so that exhaust gases do not leak. This is 3.30cm in diameter and 6.35cm in length. Your machine may have a loud hissing or popping sound coming from the exhaust area if the gasket was faulty. You may also notice th...Read moree presence of black soot around the gasket or the exhaust. Your gasket needs to be replaced if it appears worn or deformed. Otherwise, your machine will experience exhaust leaks. To detach the gasket, remove the fasteners that secure it using a socket or wrench. You can detach the gasket from your machine afterwards. Please bear in mind that this replacement part is sold individually.

This cotter pin is an OEM part that is 1.25 inches long, gold in color, and sold individually. Made of metal, it can have a range of applications on a variety of lawn and garden equipment. Generally, you will need to replace this part if it becomes broken due to age and wear, or if you need to remove it for making other repairs. This is...Read more an easy repair that only requires a pair of pliers to carry out. You need to bend one end around the shaft or bolt and bend the other around the back end of the bolt to complete the repair.

We understand how important a fully functioning dishwasher is for you, and we're here to help when there's a problem. We have the 2 Deter2nt Module that your dishwasher needs to work efficiently. This crucial component carries your dishwasher deter2nt and distributes it accurately throughout the wash cycles, keeping your dishes squeaky ...Read moreclean every time. Imagine no more specks, stains, or hazy films on your dishes - just sparkling clean results each and every time you unload. That's what you can expect with this little, but mighty, module. This module is crafted specifically for 2 dishwashers, ensuring a smooth and snug fit. Prior to installing this part, remember to either switch off the circuit breaker or unplug your dishwasher. Safety is crucial, so we also recommend wearing work gloves to protect your hands while doing the installation. 2tting your dishwasher back to performing its best doesnt have to be complicated or expensive with the right part. The 2 Deter2nt Module is your trusted choice to give your dishwasher a boost in performance and reliability. 2t back to enjoying perfectly clean dishes without a worry! Order your 2 Deter2nt Module now and 2t your dishwasher back to working like new!

This is a genuine manufacturer approved replacement ground drive idler pulley designed for lawn tractors. The purpose of this pulley is to apply tension to the belt. It is made out of plastic with metal and it is sold individually.

Genuine Murray replacement part, this item is sold individually. This is the belt that transmits power from the engine to the transmission giving the Tractor motion. It is put on the large pulley that is connected to the transmission, then on the top of the Stacked Pulley Assembly. It is used on all of the Lawn Tractor models shown below.

The Mandrell Assembly, or Jackshaft Housing Assembly includes the housing, shaft assembly, bearing, and nut. It will require a screw driver, pliers, socket set and wrench set to install, and its installation is rated as "Easy". This silver, metal assembly is used to secure the mower's deck and is driven by a belt which turns the cutting b...Read morelade underneath. It attaches on the deck of the mower. If broken, damaged or worn it should be replaced. You'll know if this is the case if there is a stretching sound, grinding sound, or vibration. Refer to your make, model and diagrams to ensure this is the correct part.

This is a genuine Murray replacement part, it is sold individually. The 091334MA Bushing /Bearing is installed in the front wheel of the Murray Lawn Tractors shown below. There are two of the parts per wheel. One is installed on the outside of the wheel the other is installed on the inside of the wheel. Once they are installed the wheel, it can be positioned on to the left or right spindle assembly.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This is a genuine manufacturer-sourced part which is designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged clamp that is used to secure the hose. Keep in mind this high-quality product is made of durable metal and is sold individually. Please make sure to check the appropriate diagrams for your model for the correct location and application of this hardware.

The hair pin is a silver, metal pin used to secure and lock parts in place. If broken, the part being secured will come loose and the pin should be replaced. This is an OEM part directly from the manufacturer. Most customers rated the replacement of the hair pin as an easy repair.