Models > 38183

38183 Toro Snow Blower - Overview

Models starting with 38183

Exact Part matches for your search term

[Viewing 2 of 2]
ELECTRICAL TEST CORD – Part Number: 038183
ELECTRICAL TEST CORD
This part number matches the current model number 38183
PartSelect #: PS20594
Manufacturer #: 038183
  No Longer Available
BOTTOM,HORIZONTAL VENT – Part Number: 38183
BOTTOM,HORIZONTAL VENT
This part number matches the current model number 38183
PartSelect #: PS4263597
Manufacturer #: 38183
  No Longer Available
Keep searches simple, eg. "belt" or "pump".
Screw – Part Number: 321-10
Screw
PartSelect #: PS9942372
Manufacturer #: 321-10
This is a replacement screw, also known as a shear pin that is used in several pieces of outdoor power equipment. It is made of metal and is approximately 2 inches in length. It is a hex head screw an...
$3.99
  In Stock
Nut-Lock, Ni – Part Number: 3296-42
Nut-Lock, Ni
PartSelect #: PS8953555
Manufacturer #: 3296-42
This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secu...
$3.99
  In Stock
Bulb-Primer – Part Number: 66-7460
Bulb-Primer
★★★★★
★★★★★
(1)
PartSelect #: PS9056413
Manufacturer #: 66-7460
This manufacturer-certified Primer Bulb is a black rubber part which comes individually sold. It is used to pump fuel from the fuel tank to the carburetor to start the engine. Installation is rated as...
$6.57
  In Stock
Screw – Part Number: 650926
Screw
PartSelect #: PS9293090
Manufacturer #: 650926
$4.99
  In Stock
Washer-Curved – Part Number: 107-3844
Washer-Curved
PartSelect #: PS8832975
Manufacturer #: 107-3844
A washer is used for things such as load distribution, stability, alignment and protection for whatever equipment it is fastened between. This curved washer, also known as a wave washer or spring wash...
$3.99
  In Stock
Bowl Gasket Tecumseh – Part Number: 49-841
Bowl Gasket Tecumseh
PartSelect #: PS9958948
Manufacturer #: 49-841
This OEM Carburetor Bowl Gasket attaches between the carburetor bowl and carburetor in order to seal the parts together. This model is rubber, black, and comes individually sold. Installation is rated...
  No Longer Available
Knob-Handle – Part Number: 106-4161
Knob-Handle
PartSelect #: PS8827606
Manufacturer #: 106-4161
$4.99
  In Stock
Screw-Handle – Part Number: 92-2260
Screw-Handle
PartSelect #: PS9155070
Manufacturer #: 92-2260
$4.99
  In Stock
Nut-Lock, Ni – Part Number: 3296-29
Nut-Lock, Ni
PartSelect #: PS9276436
Manufacturer #: 3296-29
The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is use...
$3.99
  In Stock
Nut-Lock, Ni – Part Number: 3296-56
Nut-Lock, Ni
PartSelect #: PS8953375
Manufacturer #: 3296-56
$3.99
  In Stock
Key-Ignition – Part Number: 63-8360
Key-Ignition
PartSelect #: PS9051002
Manufacturer #: 63-8360
This ignition key is used in lawn equipment to start and stop its engine. Inserting the key into the ignition switch activates the starter motor. Thus, it is a safety device which prevents accidental ...
$5.96
  On Order
Oil-2 Cycle – Part Number: 730227D
Oil-2 Cycle
PartSelect #: PS9104194
Manufacturer #: 730227D
This is replacement oil for your 2-cycle engine. Oil is important for your 2-cycle engine, as it helps to lubricate the engine parts during operation. This container of oil is 236mL or 8 fluid ounces....
$3.99
  Special Order
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Grandson lost the ignition key to my Toro!
No repair, lol! Just a perfect fit for my ignition :). I bought two in case my grandson gets curious again.
Parts Used:
Key-Ignition
  • Michelle from AYLETT, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
8 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!