Models
>
38090
38090 - Overview
Models starting with 38090
Click on the best match to narrow your results.
- 38090 (9000001-9999999 - 1979) Toro Snow Blower (Snowthrower)
- 38090 (7000001-7999999 - 1987) Toro Snow Blower (Snowthrower)
- 38090 (6000001-6999999 - 1986) Toro Snow Blower (Snowthrower)
- 38090 (5000001-5999999 - 1985) Toro Snow Blower (Snowthrower)
- 38090 (4000001-4999999 - 1984) Toro Snow Blower (Snowthrower)
- 38090 (3000001-3999999 - 1983) Toro Snow Blower (Snowthrower)
- 38090 (2000001-2999999 - 1982) Toro Snow Blower (Snowthrower)
- 38090 (1000001-1999999 - 1981) Toro Snow Blower (Snowthrower)
- 38090 (0000001-0999999 - 1980) Toro Snow Blower (Snowthrower)
- 38090 Gravely Lawn Tractor Accessories (38090 Grass Bagger 44 Gallon Can 4 Wheel Tractor)
- 38090 ( 0000001 - 0999999 ) Toro Snow Blower (1132 Snowthrower)
- 38090 ( 7000001 - 7999999 ) Toro Snow Blower (1132 Snowthrower)
- 38090 ( 3000001 - 3999999 ) Toro Snow Blower (1132 Snowthrower)
- 38090 ( 6000001 - 6999999 ) Toro Snow Blower (1132 Snowthrower)
- 38090 ( 1000001 - 1999999 ) Toro Snow Blower (1132 Snowthrower)
- 38090 ( 4000001 - 4999999 ) Toro Snow Blower (1132 Snowthrower)
- 38090 ( 9000001 - 9999999 ) Toro Snow Blower (1132 Snowthrower)
- 38090 ( 2000001 - 2999999 ) Toro Snow Blower (1132 Snowthrower)
- 38090 ( 5000001 - 5999999 ) Toro Snow Blower (1132 Snowthrower)
Exact Part matches for your search term
[Viewing 2 of 2]
CHANNEL, COOLING DUCT
This part number matches the current model number 38090
PartSelect #: PS4263522
Manufacturer #: 38090
No Longer Available
Basin Cover
This part number matches the current model number 38090
PartSelect #: PS16670313
Manufacturer #: 38090
No Longer Available
Keep searches simple, eg. "belt" or "pump".
Plug-Spark
PartSelect #: PS9140427
Manufacturer #: 796112S
This part is the replacement spark plug for your engine. It measures approximately 2.5 inches by 1 inch. The spark plug creates the spark that ignites fuel in your engine during the combustion process...
$4.99
In Stock
Nut-Lock, Ni
PartSelect #: PS8953555
Manufacturer #: 3296-42
This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secu...
$3.99
In Stock
Seal,Oil
PartSelect #: PS9277860
Manufacturer #: 391086S
The Oil Seal is a manufacturer-approved rubber part which provides a seal between the crankcase and crankshaft by attaching around the axle shaft on the crankhouse housing. Installation is rated as "M...
$6.59
In Stock
Spring-Rewind Str
PartSelect #: PS8978476
Manufacturer #: 490179
This rewind starter spring or as it is also known, recoil spring, rewinds the pull robe back into the starter housing of your engine. The spring is made of metal, silver colored, and sold individually...
$15.43
In Stock
Gasket--Exhaust
PartSelect #: PS9294808
Manufacturer #: 692236
This OEM exhaust gasket in lawn and garden equipment creates a seal between the engine block and the muffler or exhaust pipe so that exhaust gases do not leak. This is 3.30cm in diameter and 6.35cm in...
$5.71
In Stock
Line-Fuel
PartSelect #: PS9140673
Manufacturer #: 791745
This fuel line is compatible with several different makes and models of small engine equipment and is sold as an individual part. Equipped with the securing clamp, this rubber fuel line is used to tra...
$10.16
In Stock
Gear-Pinion (Plastic and Aluminum Ring Gear)
PartSelect #: PS9066374
Manufacturer #: 695708
$7.18
In Stock
Common Symptoms of models starting with 38090
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Gas tank leaking, pull starter rivets worn, rope and rope bushing worn
The gas tank was a simple job, close the fuel shut off, remove fuel hose then back out 2 bolts on the mounting bracket. Reverse procedure to mount.
To replace the pull starter/recoil assy. Remove low oil warning light, and air filter housing then remove the 4 bolts holding the front cover. Once the front cover is free remove kill sw ... Read more itch wire
Drill out the rivets holding the recoil housing w/ 3/16 bit. Screws w/ nuts are included to use in place of rivets, I used red Locktite on the screws which hold the started recoil to the front cover. Make sure the pull rope is correctly oriented in the 11:00 position. Replace front cover, four bolts. Air filter housing, kill switch wire and low oil warning light
To replace the pull starter/recoil assy. Remove low oil warning light, and air filter housing then remove the 4 bolts holding the front cover. Once the front cover is free remove kill sw ... Read more itch wire
Drill out the rivets holding the recoil housing w/ 3/16 bit. Screws w/ nuts are included to use in place of rivets, I used red Locktite on the screws which hold the started recoil to the front cover. Make sure the pull rope is correctly oriented in the 11:00 position. Replace front cover, four bolts. Air filter housing, kill switch wire and low oil warning light
Read less
Parts Used:
-
Dennis from EUFAULA, OK
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Socket set, Wrench set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!