EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

3803 - Overview

Models starting with 3803

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Run Capacitor – Part Number: WR55X24064
$61.39
In Stock
Run Capacitor
★★★★★
★★★★★
(7)
Part #WR55X24064
Support steady compressor operation with this refrigerator run capacitor. It provides the electrical phase shift needed for the compressor motor to run properly as the cooling system operates. A failing capacitor may contribute to humming, difficulty starting, interrupted compressor operation, or rising compartment temperatures. Visible swelling, leaking, or burned terminals may also indicate damage. Unplug the refrigerator before accessing the component. Capacitors can retain an electrical charge after power is disconnected, so follow approved discharge procedures and avoid touching or shorting the terminals. Record the wire positions before replacement. This is an OEM part sourced directly from the manufacturer.
Door Shelf Retainer Bar End Cap – Part Number: WR2X9162
$32.64
In Stock
Door Shelf Retainer Bar End Cap
★★★★★
★★★★★
(6)
Part #WR2X9162
This is a replacement shelf bar end cap. The end cap connects to the shelf bar on either side, and then snaps into position on the freezer door. This will allow you to store items in the freezer door. It is a little more than 2 inches long and is made of white plastic. To replace the end cap, you can simply depress the locking tab and remove the entire bar and end cap assembly. Then, use a flat blade screwdriver to depress the locking tab, and the endcap will detach. Finally, snap the new end cap locking tabs into place, and snap the bar assembly back onto the freezer door. This product is sold individually.
Light Socket – Part Number: WR2X9391
$23.16
In Stock
Light Socket
★★★★★
★★★★★
(19)
Part #WR2X9391
This part is a replacement light socket for your refrigerator. It connects to the power source, and holds the light bulb. If the light in your refrigerator is not working, you could have a faulty socket. It is important to determine if the light bulb is simply burned out, or if the socket is causing the issue. Be sure to disconnect your refrigerator from the power source before you begin this repair. This socket is black in color and is sold individually. This is an OEM part sourced directly from the manufacturer.
Compressor Start Relay – Part Number: WR07X26748
$20.17
In Stock
Compressor Start Relay
★★★★★
★★★★★
(4)
Part #WR07X26748
This part is the replacement compressor start relay for your refrigerator. It is made of black plastic and is approximately 1 ¼ inches long and 1 inch wide. The compressor start relay attaches to the compressor and helps to start the compressor motor. If the compressor will not start, or if your refrigerator or freezer is too warm, you may need to replace the compressor start relay. This part is sold individually. It is an OEM part sourced directly from the manufacturer.
Refrigerator Defrost Timer – Part Number: WR9X483
$41.70
In Stock
Refrigerator Defrost Timer
★★★★★
★★★★★
(1)
Part #WR9X483
This refrigerator defrost timer will cycle for thirty minutes after every ten hours of run time.
Evaporator Motor Kit – Part Number: WR60X203
No Longer Available
Evaporator Motor Kit
★★★★★
★★★★★
(2)
Part #WR60X203
This part is located in the back of the freezer and circulates air over the refrigerator coils. These coils will convert the heat into cool air which is then circulated.
Screw – Part Number: 321-10
$6.55
In Stock
Screw
★★★★★
★★★★★
(1)
Part #321-10
This is a replacement screw, also known as a shear pin that is used in several pieces of outdoor power equipment. It is made of metal and is approximately 2 inches in length. It is a hex head screw and is sold individually. This is an OEM part sourced directly from the manufacturer.
Nut-lock, Ni – Part Number: 3296-42
$6.55
In Stock
Nut-lock, Ni
Part #3296-42
This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place, on the impeller assembly. These nuts are a one-time use part due to their locking mechanism. You'll know the nut has broken when it appears to have damaged threads or rounded off edges. Customers found this to be an easy repair.
Relay PTCR - 3 Wire – Part Number: WR07X10055
No Longer Available
Relay PTCR - 3 Wire
★★★★★
★★★★★
(3)
Part #WR07X10055
Also known as the Start Relay. The start relay briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.
Screw - #10 – Part Number: WE2M174
$19.50
In Stock
Fuel Tank – Part Number: 35584
No Longer Available
Fuel Tank
Part #35584
The fuel tank goes between the fuel tank bracket and the fuel line. This is a Tecumseh, Husqvarna, and Toro replacement part directly sourced from the manufacturer for use in engines and snowthrowers. This part holds the fuel and is priced individually. A wrench might be required during the replacement of this part. It will need to be replaced if it leaks.

Exact Part matches for your search term

Pulley Gear – Part Number: 3803
No Longer Available
Pulley Gear
This part number matches the current model number 3803
Part #3803
Ownrs Manual – Part Number: 3803
No Longer Available
Ownrs Manual
This part number matches the current model number 3803
Part #3803
WHIP L250 MM – Part Number: 3803
$657.59
Special Order
WHIP L250 MM
This part number matches the current model number 3803
Part #3803
SWITCH AY,LIQ LEVEL-W/ADJ WSHR – Part Number: 3803
$179.22
Special Order
SWITCH AY,LIQ LEVEL-W/ADJ WSHR
This part number matches the current model number 3803
Part #3803
ATP 5PZ FRN VNT PACKAGE – Part Number: 3803
$247.68
Special Order
ATP 5PZ FRN VNT PACKAGE
This part number matches the current model number 3803
Part #3803

Common Symptoms of models starting with 3803

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
No power to the fan and compressor
222 of 302 people found this instruction helpful.
  • Christian from Kearneysville, WV
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I have a fridge in my garage. I have found that a glass of ice water or a cold drink outside is very important to me. When I discovered melting ice dripping onto the garage floor I was very upset. I spun the fridge and found that the compressor and fan weren't starting. I got out my multi-meter and discovered that power was not makin g it to these components. I did some research and found the wiring diagram online. There really isn't too much going on with a fridge and the most likely candidate seemed to be the run capacitor. I ordered the part, replaced it in a few minutes and the fridge began working again.
Was this helpful?
Thank you for voting!
Freezer & Frig Were Not Cold
77 of 104 people found this instruction helpful.
  • Sam from Cooper City, AL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
First I removed the rear cover, located at the bottom of the refrigerator. Then I cleaned out the dirt & dust on and around the compressor. The relay has a cover, that is secured with a spring loaded clip. To release the clip, push in with your fingers, while disengaging the end clip with a screwdriver. Once one side is off the ot her lifts off. Remove cove exposing the relay. There is one wire terminated, with a spade clip, remove it. With a strait blade screwdriver, pry the relay off the 2 post it slides on to. (Don't be surprised if it breaks into pieces, as they are sometimes brittle. ) Slide the new relay onto the 2 posts, replace the wire onto the right terminal, and replace the relay cover & clip. Replace the rear cover. Plug in and test.
Was this helpful?
Thank you for voting!
bad light socket
45 of 56 people found this instruction helpful.
  • nancy from silsbee, TX
  • Really Easy
  • Less than 15 mins
unplugged refrigerator. removed light bulb from old socket. unsnapped old light socket and pulled it out just enough to diconnect the electrical plug that plugs into the socket . discarded the old socket and plugged in new socket. snapped in new socket into refrigerator. i watched how to do this simple procedure on you tube and decided to do it myself. easy easy easy
Was this helpful?
Thank you for voting!