38005 Snow Blower - Overview

This Ni Nut-Lock, or Nylock Nut, is a Silver 1/4 x 20 metal nut. Sold individually, it can be adjusted using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place, on the impeller assembly. These nuts are a one-time use part due to their locking mechanism. You'll know the nut...Read more has broken when it appears to have damaged threads or rounded off edges. Customers found this to be an easy repair.

This snap ring fits into a groove to hold a pinion gear or other drive part in place. A loose drive part may mean the ring is bent, weak, or missing. Check the groove, washers, bearings, and shaft for damage before replacing it. Confirm fit with the full machine model, serial range, and parts diagram. Turn off the equipment and disconnect...Read more the battery or spark plug lead when needed. Wear eye protection and use retaining-ring pliers. Make sure the new ring sits fully and evenly in the groove before use.

This metal ball bearing reduces friction and evenly distributes weight among the rotating parts in your lawn equipment. These bearings can be found in various areas such as the wheels, in pulleys, blades or augers. When the bearing is damaged, you may notice a few things. Your machine may produce rough or grinding noises and excessively p...Read morelay or wobble. The affected part may also become stuck. Immediate replacement is necessary to prevent increased friction, inefficient performance, and potential equipment failure. Removing the bearing depends on your model, so consult your user manual for guidance. You will need to use a screwdriver or pliers to remove the surrounding components around the bearing and a bearing puller, pry bar, or mallet to release the bearing itself from its housing. As ball bearings wear out together, it is advisable to replace all of them at once. Ensure you verify the number of bearings your machine needs before purchasing this OEM replacement part as it is sold individually.

This is a genuine replacement part manufactured for use with outdoor power equipment. This flanged hex head screw has several applications, please see model diagram for part use and location. This screw is available as an individual replacement part.

It is a genuine OEM sourced replacement screw which is specially designed for use with Toro snowblowers. This hardware has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams of your model for the correct location and use of this item. It is a high-quality component which is made of du...Read morerable metal and it is sold individually, you will need a Phillips screwdriver to install or remove it.

This is an authentic replacement part manufactured for use with trimmers and snow throwers. The special key is used as a safety device used to prevent start-up when the key is removed. This key is available as an individual replacement part, please see model diagram for associative parts.

This is an authentic replacement part sourced directly from the manufacturer. The screw is commonly found in Toro snow throwers and lawn mowers. This is a metal part, and may be used in different locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts diagra...Read morem to be sure of ordering the correct part. You will require a screwdriver when replacing this part. This item is sold individually.

This is an authentic OEM part. The Toro starter switch is constructed of metal, wiring and plastic. This item is compatible with many snowthrower machines, and is fitted in the switch box. The starter switch is sold individually. A screwdriver and a wrench are needed for the removal and replacement.

This is an OEM part sourced directly from the manufacturer. The nut is commonly found in snowthrowers and lawn tractors from Toro and Lawn Boy. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different nuts used in the machine. Refer to the parts diag...Read moreram to be sure of ordering the correct part. You will require a wrench when replacing this item. The nut is available as an individual replacement part.